AT-601(40) Hirose component image

AT-601(40)

In Stock

Hirose logo Hirose · franchised distributor

RF ATTENUATOR 1DB 50OHM TNC

Listed in Attenuators

75 pcs in stock ships same day before 6pm

from $114.2400

Quantity Unit Price
1+ $114.2400 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the AT-601(40)?

AT-601-40 is a rf attenuator 1db 50ohm tnc, featuring the TNC In-Line Module case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Hirose Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
AT-307(40) RF ATTENUATOR 7DB 50OHM SMA 84 $119.3600 In Stock
AT-113(40) RF ATTENUATOR 13DB 50OHM SMA 91 $119.3600 In Stock
AT-520(40) RF ATTENUATOR 20DB 50OHM BNC 98 $88.9100 In Stock
AT-220(40) RF ATTENUATOR 20DB 50OHM 4SMD 80 $131.2000 In Stock
AT-509(40) RF ATTENUATOR 9DB 50OHM BNC 109 $83.6800 In Stock
AT-105V RF ATTENUATOR 5DB 50OHM SMA 135 $58.3800 In Stock
AT-112(40) RF ATTENUATOR 12DB 50OHM SMA 78 $119.3600 In Stock
AT-114(40) RF ATTENUATOR 14DB 50OHM SMA 86 $119.3600 In Stock
AT-109(40) RF ATTENUATOR 9DB 50OHM SMA 80 $119.3600 In Stock
AT-305(40) RF ATTENUATOR 5DB 50OHM SMA 84 $119.3600 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

AT-601(40) Specifications

Series -
Package Bulk
Part Status Active
Attenuation Value 1dB
Frequency Range 0 Hz ~ 6.0 GHz
Power (Watts) 2W
Impedance 50 Ohms
Package / Case TNC In-Line Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
ATT-0225-04-TNC-02 RF ATTENUATOR 4DB 50OHM TNC 1,276 RFQ 55%
ATT-0225-15-TNC-02 RF ATTENUATOR 15DB 50OHM TNC 898 RFQ 55%
ATT-0225-14-TNC-02 RF ATTENUATOR 14DB 50OHM TNC 1,048 RFQ 55%
ATT-0225-40-TNC-02 RF ATTENUATOR 40DB 50OHM TNC 2,561 RFQ 55%
ATT-0225-05-TNC-02 RF ATTENUATOR 5DB 50OHM TNC 3,225 RFQ 55%
ATT-0225-07-TNC-02 RF ATTENUATOR 7DB 50OHM TNC 1,244 RFQ 55%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Hirose Parts in Stock

Request a Quote

Need AT-601(40) or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.