AT-505(40) Hirose component image

AT-505(40)

In Stock

Hirose logo Hirose · franchised distributor

RF ATTENUATOR 5DB 50OHM BNC

Listed in Attenuators

100 pcs in stock ships same day before 6pm

from $83.6800

Quantity Unit Price
1+ $83.6800 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the AT-505(40)?

AT-505-40 is a rf attenuator 5db 50ohm bnc, featuring the BNC In-Line Module case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Hirose Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
AT-606(40) RF ATTENUATOR 6DB 50OHM TNC 4,921 RFQ In Stock
AT-430 RF ATTENUATOR 30DB 50OHM NTYPE 60 $163.5000 In Stock
AT-406(40) RF ATTENUATOR 6DB 50OHM NTYPE 94 $109.4400 In Stock
AT-620(40) RF ATTENUATOR 20DB 50OHM TNC 2,381 RFQ In Stock
AT-514(40) RF ATTENUATOR 14DB 50OHM BNC 108 $83.6800 In Stock
AT-603(40) RF ATTENUATOR 3DB 50OHM TNC 1,252 RFQ In Stock
AT-420(40) RF ATTENUATOR 20DB 50OHM NTYPE 78 $109.4400 In Stock
AT-502 RF ATTENUATOR 2DB 50OHM BNC 102 $83.6800 In Stock
AT-610(40) RF ATTENUATOR 10DB 50OHM TNC 2,575 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

AT-505(40) Specifications

Series -
Package Bulk
Part Status Active
Attenuation Value 5dB
Frequency Range 0 Hz ~ 4.0 GHz
Power (Watts) 2W
Impedance 50 Ohms
Package / Case BNC In-Line Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CT3369A-14 RF ATTENUATOR 14DB 50OHM BNC 118 $58.9000 100%
CT3369A-30 RF ATTENUATOR 30DB 50OHM BNC 115 $58.9000 100%
CT3369A-03 RF ATTENUATOR 3DB 50OHM MODULE 134 $58.9000 100%
AT-510(40) RF ATTENUATOR 10DB 50OHM BNC 91 $88.9100 100%
CT3369A-10 RF ATTENUATOR 10DB 50OHM BNC 134 $58.9000 100%
AT-509(40) RF ATTENUATOR 9DB 50OHM BNC 109 $83.6800 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Hirose Parts in Stock

Request a Quote

Need AT-505(40) or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.