AT-2305(40) Hirose component image

AT-2305(40)

In Stock

Hirose logo Hirose · franchised distributor

RF ATTENUATOR 5DB 50OHM SMA

Listed in Attenuators

2,819 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the AT-2305(40)?

AT-2305-40 is a rf attenuator 5db 50ohm sma, featuring the SMA In-Line Module case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Hirose Series Variants in Stock

12 variants of this series in stock
Part Number Description Stock Unit Price Status
AT-2310(40) RF ATTENUATOR 10DB 50OHM SMA 410 $13.7600 In Stock
AT-2302(40) RF ATTENUATOR 2DB 50OHM SMA 2,134 RFQ In Stock
AT-2308(40) RF ATTENUATOR 8DB 50OHM SMA 2,159 RFQ In Stock
AT-2304(40) RF ATTENUATOR 4DB 50OHM SMA 1,407 RFQ In Stock
AT-2309(40) RF ATTENUATOR 9DB 50OHM SMA 2,699 RFQ In Stock
AT-2320(40) RF ATTENUATOR 20DB 50OHM SMA 408 $13.7600 In Stock
AT-2300-(0)(40) RF ATTENUATOR 0DB 50OHM SMA 398 $13.7600 In Stock
AT-2303(40) RF ATTENUATOR 3DB 50OHM SMA 408 $13.7600 In Stock
AT-2301(40) RF ATTENUATOR 1DB 50OHM SMA 1,542 RFQ In Stock
AT-2300-(0.5)(40) RF ATTENUATOR 0DB 50OHM SMA 3,479 RFQ In Stock
+ 2 more variants in stock — browse the full category

Technical Parameters

AT-2305(40) Specifications

Series -
Package Bulk
Part Status Obsolete
Attenuation Value 5dB
Frequency Range 0 Hz ~ 2.5 GHz
Power (Watts) 1W
Impedance 50 Ohms
Package / Case SMA In-Line Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
AT-2210(40) RF ATTENUATOR 10DB 50OHM SMA 487 $11.2710 100%
M3933/25-26N RF ATTENUATOR 30DB 50OHM SMA 80 $98.3841 63%
M3933/25-09S RF ATTENUATOR 9DB 50OHM SMA 54 $217.7557 63%
M3933/25-26S RF ATTENUATOR 30DB 50OHM SMA 63 $217.7557 63%
M3933/25-12N RF ATTENUATOR 12DB 50OHM SMA 97 $94.1441 63%
AT-2302(40) RF ATTENUATOR 2DB 50OHM SMA 2,134 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Hirose Parts in Stock

Request a Quote

Need AT-2305(40) or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.