AT-210(40) Hirose component image

AT-210(40)

In Stock

Hirose logo Hirose · franchised distributor

RF ATTENUATOR 10DB 50OHM SMA

Listed in Attenuators

79 pcs in stock ships same day before 6pm

from $131.2000

Quantity Unit Price
1+ $131.2000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the AT-210(40)?

AT-210-40 is a rf attenuator 10db 50ohm sma, featuring the SMA In-Line Module case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Hirose Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
AT-307(40) RF ATTENUATOR 7DB 50OHM SMA 84 $119.3600 In Stock
AT-113(40) RF ATTENUATOR 13DB 50OHM SMA 91 $119.3600 In Stock
AT-520(40) RF ATTENUATOR 20DB 50OHM BNC 98 $88.9100 In Stock
AT-220(40) RF ATTENUATOR 20DB 50OHM 4SMD 80 $131.2000 In Stock
AT-509(40) RF ATTENUATOR 9DB 50OHM BNC 109 $83.6800 In Stock
AT-105V RF ATTENUATOR 5DB 50OHM SMA 135 $58.3800 In Stock
AT-112(40) RF ATTENUATOR 12DB 50OHM SMA 78 $119.3600 In Stock
AT-114(40) RF ATTENUATOR 14DB 50OHM SMA 86 $119.3600 In Stock
AT-109(40) RF ATTENUATOR 9DB 50OHM SMA 80 $119.3600 In Stock
AT-305(40) RF ATTENUATOR 5DB 50OHM SMA 84 $119.3600 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

AT-210(40) Specifications

Series -
Package Bulk
Part Status Active
Attenuation Value 10dB
Frequency Range 0 Hz ~ 18.0 GHz
Power (Watts) 1W
Impedance 50 Ohms
Package / Case SMA In-Line Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
AT-100-(3.5)(40) RF ATTENUATOR 3.5DB 50OHM SMA 86 $136.4800 100%
AT-100-(2.5)(40) RF ATTENUATOR 2.5DB 50OHM SMA 76 $136.4800 100%
AT-200-(0)(40) RF ATTENUATOR 0DB 50OHM SMA 69 $131.2000 100%
M3933/16-09N RF ATTENUATOR 7DB SMA MODULE 85 $117.7844 100%
AT-107(40) RF ATTENUATOR 7DB 50OHM SMA 72 $119.3600 100%
M3933/16-01N RF ATTENUATOR 3DB SMA MODULE 78 $129.1800 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Hirose Parts in Stock

Request a Quote

Need AT-210(40) or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.