AT-207(40) Hirose component image

AT-207(40)

In Stock

Hirose logo Hirose · franchised distributor

RF ATTENUATOR 7DB 50OHM SMA

Listed in Attenuators

80 pcs in stock ships same day before 6pm

from $131.2000

Quantity Unit Price
1+ $131.2000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the AT-207(40)?

AT-207-40 is a rf attenuator 7db 50ohm sma, featuring the SMA In-Line Module case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Hirose Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
AT-206(40) RF ATTENUATOR 6DB 50OHM SMA 75 $131.2000 In Stock
AT-203(40) RF ATTENUATOR 3DB 50OHM SMA 70 $131.2000 In Stock
AT-202(40) RF ATTENUATOR 2DB 50OHM SMA 71 $131.2000 In Stock
AT-204(40) RF ATTENUATOR 4DB 50OHM SMA 78 $131.2000 In Stock
AT-200-(0)(40) RF ATTENUATOR 0DB 50OHM SMA 69 $131.2000 In Stock
AT-201(40) RF ATTENUATOR 1DB 50OHM SMA 73 $131.2000 In Stock
AT-205(40) RF ATTENUATOR 5DB 50OHM SMA 77 $131.2000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

AT-207(40) Specifications

Series -
Package Bulk
Part Status Last Time Buy
Attenuation Value 7dB
Frequency Range 0 Hz ~ 18.0 GHz
Power (Watts) 1W
Impedance 50 Ohms
Package / Case SMA In-Line Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
AT-100-(0)-WP1(40) RF ATTENUATOR 0DB 50OHM SMA 3,041 RFQ 100%
AT-105(40) RF ATTENUATOR 5DB 50OHM SMA 84 $119.3600 100%
AT-320(40) RF ATTENUATOR 20DB 50OHM SMA 75 $119.3600 100%
AT-120(40) RF ATTENUATOR 20DB 50OHM SMA 85 $119.3600 100%
M3933/25-68S RF ATTENUATOR 5DB 50OHM SMA 55 $202.5700 73%
M3933/25-61N RF ATTENUATOR 1.5DB 50OHM SMA 66 $136.5100 73%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Hirose Parts in Stock

Request a Quote

Need AT-207(40) or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.