AT-1002(40) Hirose component image

AT-1002(40)

In Stock

Hirose logo Hirose · franchised distributor

RF ATTENUATOR 2DB 50OHM SMA

Listed in Attenuators

47 pcs in stock ships same day before 6pm

from $466.5000

Quantity Unit Price
1+ $466.5000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the AT-1002(40)?

AT-1002-40 is a rf attenuator 2db 50ohm sma, featuring the SMA In-Line Module case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Hirose Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
AT-1103(40) RF ATTENUATOR 3DB 50OHM SMA 48 $501.0000 In Stock
AT-1020(BOX)(40) RF ATTENUATOR 20DB 50OHM SMA 4,816 RFQ In Stock
AT-1001(40) RF ATTENUATOR 1DB 50OHM SMA 60 $466.5000 In Stock
AT-1020(40) RF ATTENUATOR 20DB 50OHM SMA 43 $466.5000 In Stock
AT-1010(40) RF ATTENUATOR 10DB 50OHM SMA 47 $466.5000 In Stock
AT-1006(40) RF ATTENUATOR 6DB 50OHM SMA 54 $466.5000 In Stock
AT-1106(40) RF ATTENUATOR 6DB 50OHM SMA 43 $501.0000 In Stock
AT-1120(40) RF ATTENUATOR 20DB 50OHM SMA 43 $507.0000 In Stock
AT-1003(40) RF ATTENUATOR 3DB 50OHM SMA 41 $466.5000 In Stock
AT-1110(40) RF ATTENUATOR 10DB 50OHM SMA 48 $501.0000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

AT-1002(40) Specifications

Series -
Package Bulk
Part Status Active
Attenuation Value 2dB
Frequency Range 0 Hz ~ 8.0 GHz
Power (Watts) 10W
Impedance 50 Ohms
Package / Case SMA In-Line Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
AT-1001(40) RF ATTENUATOR 1DB 50OHM SMA 60 $466.5000 100%
AT-130V RF ATTENUATOR 30DB 50OHM SMA 142 $54.0900 100%
AT-1103(40) RF ATTENUATOR 3DB 50OHM SMA 48 $501.0000 100%
AT-1020(40) RF ATTENUATOR 20DB 50OHM SMA 43 $466.5000 100%
AT-1010(40) RF ATTENUATOR 10DB 50OHM SMA 47 $466.5000 100%
AT-1006(40) RF ATTENUATOR 6DB 50OHM SMA 54 $466.5000 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Hirose Parts in Stock

Request a Quote

Need AT-1002(40) or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.