AP851 100R F Ohmite component image

AP851 100R F

In Stock

Ohmite logo Ohmite · franchised distributor

RES 100 OHM 1% 50W TO220-2 FP

Listed in Through Hole Resistors

1,097 pcs in stock ships same day before 6pm

from $4.4952

Quantity Unit Price
1 - 99 $4.7092
100+ $4.4952 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the AP851 100R F?

AP851-100R-F is a res 100 ohm 1% 50w to220-2 fp, featuring a power rating of 50W, a tolerance of ±1%, a Thick Film composition, and the TO-220-2 Full Pack case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

19 variants of this series in stock
Part Number Description Stock Unit Price Status
AP851 25R F RES 25 OHM 50W 1% TO220 853 $6.1200 In Stock
AP851 470R J RES 470 OHM 5% 50W TO220-2 FP 1,147 $4.5080 In Stock
AP851 15R J RES 15 OHM 50W 5% TO220 814 $6.4100 In Stock
AP851 10R F RES 10 OHM 1% 50W TO220-2 FP 783 $6.6900 In Stock
AP851 10K J RES 10K OHM 5% 50W TO220-2 FP 1,144 $4.5080 In Stock
AP851 3R3 J RES 3.3 OHM 5% 50W TO220-2 FP 1,148 $4.5080 In Stock
AP851 25R J RES 25 OHM 50W 5% TO220 895 $5.8600 In Stock
AP851 2R J RES 2 OHM 50W 5% TO220 884 $5.8600 In Stock
AP851 1R J RES 1 OHM 50W 5% TO220 814 $6.4100 In Stock
AP851 220R J RES 220 OHM 5% 50W TO220-2 FP 1,155 $4.5080 In Stock
+ 9 more variants in stock — browse the full category

Technical Parameters

AP851 100R F Specifications

Series ARCOL, AP851
Package Tube
Part Status Active
Resistance 100 Ohms
Tolerance ±1%
Power (Watts) 50W
Composition Thick Film
Features Non-Inductive
Temperature Coefficient ±100ppm/°C
Operating Temperature -60°C ~ 150°C
Package / Case TO-220-2 Full Pack
Supplier Device Package TO-220
Size / Dimension 0.410" L x 0.125" W (10.41mm x 3.18mm)
Height - Seated (Max) 0.650" (16.52mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
AP851 100R J RES 100 OHM 5% 50W TO220-2 FP 796 $6.7000 75%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need AP851 100R F or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.