AP836 4R7 J Ohmite component image

AP836 4R7 J

In Stock

Ohmite logo Ohmite · franchised distributor

RES 4.7 OHM 35W 5% TO220

Listed in Through Hole Resistors

1,317 pcs in stock ships same day before 6pm

from $2.7364

Quantity Unit Price
1 - 99 $3.9400
100+ $2.7364 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the AP836 4R7 J?

AP836-4R7-J is a res 4.7 ohm 35w 5% to220, featuring a power rating of 35W, a tolerance of ±5%, a Thick Film composition, and the TO-220-2 case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

21 variants of this series in stock
Part Number Description Stock Unit Price Status
AP836 33R J RES 33 OHM 5% 35W TO220-2 1,246 $4.1200 In Stock
AP836 1R J RES 1 OHM 5% 35W TO220-2 1,263 $4.1200 In Stock
AP836 47R J RES 47 OHM 35W 5% TO220 772 $6.8600 In Stock
AP836 470R J RES 470 OHM 35W 5% TO220 1,969 $2.6000 In Stock
AP836 4K7 J RES 4.7K OHM 35W 5% TO220 742 $7.0900 In Stock
AP836 10K J RES 10K OHM 5% 35W TO220-2 1,255 $4.1200 In Stock
AP836 3R3 J RES 3.3 OHM 35W 5% TO220 1,316 $3.9400 In Stock
AP836 2R2 J RES 2.2 OHM 5% 35W TO220-2 1,255 $4.1200 In Stock
AP836 22R J RES 22 OHM 5% 35W TO220-2 1,870 $2.7232 In Stock
AP836 150R J RES 150 OHM 5% 35W TO220-2 1,256 $4.1200 In Stock
+ 11 more variants in stock — browse the full category

Technical Parameters

AP836 4R7 J Specifications

Series ARCOL, AP836
Package Tray
Part Status Active
Resistance 4.7 Ohms
Tolerance ±5%
Power (Watts) 35W
Composition Thick Film
Features Non-Inductive
Temperature Coefficient ±100ppm/°C
Operating Temperature -60°C ~ 150°C
Package / Case TO-220-2
Supplier Device Package TO-220
Size / Dimension 0.400" L x 0.175" W (10.16mm x 4.44mm)
Height - Seated (Max) 0.591" (15.00mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TCH35P4R70JE RES 4.7 OHM 35W 5% TO220 989 $5.2096 100%
TCH35P5R10JE RES 5.1 OHM 5% 35W TO220-2 956 $5.4464 95%
AP836 5R6 J RES 5.6 OHM 5% 35W TO220-2 1,261 $4.1200 89%
TCH35P5R60JE RES 5.6 OHM 5% 35W TO220-2 749 $7.1000 89%
TCH35P3R90JE RES 3.9 OHM 5% 35W TO220-2 742 $7.1000 89%
TCH35P3R30JE RES 3.3 OHM 5% 35W TO220-2 735 $7.1000 79%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need AP836 4R7 J or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.