AP101 R5 J Ohmite component image

AP101 R5 J

In Stock

Ohmite logo Ohmite · franchised distributor

RES 500M OHM 5% 100W TO247-2

Listed in Through Hole Resistors

641 pcs in stock ships same day before 6pm

from $4.4540

Quantity Unit Price
1 - 34 $8.2500
35 - 104 $7.2215
105 - 1,014 $5.5020
1,015+ $4.4540 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the AP101 R5 J?

AP101-R5-J is a res 500m ohm 5% 100w to247-2, featuring a power rating of 100W, a tolerance of ±5%, a Thick Film composition, and the TO-247-2 case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
AP101 33R J RES 33 OHM 5% 100W TO247-2 589 $9.2500 In Stock
AP101 3K J RES 3K OHM 5% 100W TO247-2 660 $8.1100 In Stock
AP101 56R J RES 56 OHM 5% 100W TO247-2 649 $8.1100 In Stock
AP101 6R2 J RES 6.2 OHM 5% 100W TO247-2 650 $8.1100 In Stock
AP101 7R5 J RES 7.5 OHM 5% 100W TO247-2 665 $8.1100 In Stock
AP101 390R J RES 390 OHM 5% 100W TO247-2 666 $8.1100 In Stock
AP101 470R J RES 470 OHM 5% 100W TO247-2 662 $8.1100 In Stock
AP101 R2 J RES 200M OHM 5% 100W TO247-2 644 $8.2500 In Stock
AP101 100R J RES 100 OHM 5% 100W TO247-2 660 $8.1100 In Stock
AP101 6R8 J RES 6.8 OHM 5% 100W TO247-2 665 $8.1100 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

AP101 R5 J Specifications

Series ARCOL, AP101
Package Tray
Part Status Active
Resistance 500 mOhms
Tolerance ±5%
Power (Watts) 100W
Composition Thick Film
Features Moisture Resistant, Non-Inductive
Temperature Coefficient -
Operating Temperature -65°C ~ 175°C
Package / Case TO-247-2
Supplier Device Package TO-247
Size / Dimension 0.620" L x 0.195" W (15.75mm x 4.95mm)
Height - Seated (Max) 0.825" (20.96mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TEH100MR500JE RES 500M OHM 5% 100W TO247-2 420 $13.0300 100%
TR100JBX1R00 RES 1 OHM 100W 5% TO247-2 808 $6.5600 58%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need AP101 R5 J or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.