AP101 2R F Ohmite component image

AP101 2R F

In Stock

Ohmite logo Ohmite · franchised distributor

RES 2 OHM 1% 100W TO247-2

Listed in Through Hole Resistors

723 pcs in stock ships same day before 6pm

from $7.3200

Quantity Unit Price
1+ $7.3200 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the AP101 2R F?

AP101-2R-F is a res 2 ohm 1% 100w to247-2, featuring a power rating of 100W, a tolerance of ±1%, a Thick Film composition, and the TO-247-2 case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
AP101 33R J RES 33 OHM 5% 100W TO247-2 589 $9.2500 In Stock
AP101 3K J RES 3K OHM 5% 100W TO247-2 660 $8.1100 In Stock
AP101 56R J RES 56 OHM 5% 100W TO247-2 649 $8.1100 In Stock
AP101 6R2 J RES 6.2 OHM 5% 100W TO247-2 650 $8.1100 In Stock
AP101 7R5 J RES 7.5 OHM 5% 100W TO247-2 665 $8.1100 In Stock
AP101 390R J RES 390 OHM 5% 100W TO247-2 666 $8.1100 In Stock
AP101 470R J RES 470 OHM 5% 100W TO247-2 662 $8.1100 In Stock
AP101 R2 J RES 200M OHM 5% 100W TO247-2 644 $8.2500 In Stock
AP101 100R J RES 100 OHM 5% 100W TO247-2 660 $8.1100 In Stock
AP101 6R8 J RES 6.8 OHM 5% 100W TO247-2 665 $8.1100 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

AP101 2R F Specifications

Series ARCOL, AP101
Package Tube
Part Status Active
Resistance 2 Ohms
Tolerance ±1%
Power (Watts) 100W
Composition Thick Film
Features Moisture Resistant, Non-Inductive
Temperature Coefficient ±300ppm/°C
Operating Temperature -65°C ~ 175°C
Package / Case TO-247-2
Supplier Device Package TO-247
Size / Dimension 0.620" L x 0.195" W (15.75mm x 4.95mm)
Height - Seated (Max) 0.825" (20.96mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
AP101 3R F RES 3 OHM 1% 100W TO247-2 727 $7.3200 76%
AP101 2R2 J RES 2.2 OHM 5% 100W TO247-2 650 $8.1100 69%
AP101 1R8 J RES 1.8 OHM 5% 100W TO247-2 663 $8.1100 69%
AP101 1R F RES 1 OHM 1% 100W TO247-2 732 $7.3200 58%
AP101 1R5 J RES 1.5 OHM 5% 100W TO247-2 650 $8.1100 58%
AP101 2R7 J RES 2.7 OHM 5% 100W TO247-2 662 $8.1100 57%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need AP101 2R F or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.