ANT-DB1-WRT-MON-RPS Linx Technologies component image

ANT-DB1-WRT-MON-RPS

In Stock

Linx Technologies logo Linx Technologies · franchised distributor

RF ANT 2.45/5.8GHZ DOME PANEL MT

Listed in RF Antennas

382 pcs in stock ships same day before 6pm

from $12.9783

Quantity Unit Price
1 - 24 $14.9200
25 - 99 $13.8016
100+ $12.9783 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the ANT-DB1-WRT-MON-RPS?

ANT-DB1-WRT-MON-RPS is a rf ant 2.45/5.8ghz dome panel mt, featuring a max power of 5 W. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Linx Technologies Series Variants in Stock

3 variants of this series in stock
Part Number Description Stock Unit Price Status
ANT-DB1-WRT-MON-SMA RF ANT 2.45/5.8GHZ DOME PANEL MT 349 $16.1800 In Stock
ANT-DB1-WRT-MON-UFL RF ANT 2.45/5.8GHZ DOME PANEL MT 356 $16.1800 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

ANT-DB1-WRT-MON-RPS Specifications

Series WRT-MON
Package Bulk
Part Status Active
RF Family/Standard WiFi
Frequency Group UHF (2GHz ~ 3GHz), SHF (f > 4GHz)
Frequency (Center/Band) 2.4GHz, 2.5GHz, 5.7GHz, 5.8GHz
Frequency Range 2.4GHz ~ 2.5GHz, 5.725GHz ~ 5.875GHz
Antenna Type Dome
Number of Bands 2
VSWR 2
Return Loss -
Gain 1.0dBi, 2.8dBi
Power - Max 5 W
Features Cable - 216mm
Termination RP-SMA Male
Ingress Protection -
Mounting Type Panel Mount
Height (Max) 1.063" (27.00mm)
Applications Wi-Fi

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
BWA-2O2-001 ANTENNA 2.4GHZ DOME 1/2 NPT 2 DB 74 $161.7000 100%
OP24516SX-91RSMM ANT IN/OUT 802.11N 6PORT 36" 73 $150.5800 100%
MA673.A.CGH.004 RF ANT 2.4/5.38GHZ DOME RP-SMA 73 $140.2000 100%
TANGO23/2.5M/SMAM/S/RP/19 RF ANT 2.4GHZ/5.5GHZ PUCK RP-SMA 223 $28.4700 100%
TANGO25/0.1M/SMAM/S/RP/29 RF ANT 2.4GHZ PUCK RP-SMA MALE 372 $15.0600 100%
TANGO23/1M/SMAM/S/RP/19 RF ANT 2.4GHZ/5.5GHZ PUCK RP-SMA 235 $26.7100 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Linx Technologies Parts in Stock

Request a Quote

Need ANT-DB1-WRT-MON-RPS or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.