ALSR01100R0JE12 Vishay / Dale component image

ALSR01100R0JE12

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

RES 100 OHM 1W 5% AXIAL

Listed in Through Hole Resistors

3,199 pcs in stock ships same day before 6pm

from $0.6426

Quantity Unit Price
1 - 9 $1.5800
10 - 24 $1.4030
25 - 49 $1.3004
50 - 99 $1.2240
100 - 249 $1.0710
250 - 499 $0.9180
500 - 999 $0.7650
1,000 - 4,999 $0.6630
5,000+ $0.6426 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the ALSR01100R0JE12?

ALSR01100R0JE12 is a res 100 ohm 1w 5% axial, featuring a power rating of 1W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Vishay / Dale Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
ALSR0347R00JE12 RES 47 OHM 3W 5% AXIAL 3,213 $1.5800 In Stock
ALSR0515K00JE12 RES 15K OHM 5W 5% AXIAL 3,260 $1.5500 In Stock
ALSR03R3000JE12 RES 0.3 OHM 3W 5% AXIAL 4,980 $1.0125 In Stock
ALSR0333R00JE12 RES 33 OHM 3W 5% AXIAL 3,196 $1.5800 In Stock
ALSR033K300JE12 RES 3.3K OHM 3W 5% AXIAL 3,206 $1.5800 In Stock
ALSR0518R00FE12 RES 18 OHM 5W 1% AXIAL 2,987 $1.7000 In Stock
ALSR10270R0FE12 RES 270 OHM 7W 1% AXIAL 3,889 $1.3020 In Stock
ALSR102K250FE12 RES 2.25K OHM 7W 1% AXIAL 3,299 $1.5330 In Stock
ALSR019K000JE12 RES 9K OHM 1W 5% AXIAL 2,722 $1.8600 In Stock
ALSR035K600JE12 RES 5.6K OHM 3W 5% AXIAL 2,954 $1.7200 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

ALSR01100R0JE12 Specifications

Series ALSR
Package Bulk
Part Status Active
Resistance 100 Ohms
Tolerance ±5%
Power (Watts) 1W
Composition Wirewound
Features Moisture Resistant
Temperature Coefficient ±30ppm/°C
Operating Temperature -65°C ~ 250°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.110" Dia x 0.406" L (2.79mm x 10.31mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CW010100R0JS733 RES 100 OHM 13W 5% AXIAL 3,914 $1.2900 67%
CW010100R0JE12 RES 100 OHM 13W 5% AXIAL 1,963 $2.6100 67%
20J100 RES 100 OHM 5% 10W AXIAL 3,227 $1.5660 67%
CW005100R0JS73 RES 100 OHM 6.5W 5% AXIAL 8,229 $0.6112 67%
20J100E RES 100 OHM 5% 10W AXIAL 2,089 $2.4500 67%
CW010100R0JE123 RES 100 OHM 13W 5% AXIAL 2,874 $1.7682 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need ALSR01100R0JE12 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.