ALD1701APAL Advanced Linear Devices, Inc. component image

ALD1701APAL

In Stock

Advanced Linear Devices, Inc. logo Advanced Linear Devices, Inc. · franchised distributor

IC OPAMP GP 1 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

783 pcs in stock ships same day before 6pm

from $6.3756

Quantity Unit Price
1 - 49 $6.7580
50+ $6.3756 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the ALD1701APAL?

ALD1701APAL is a ic opamp gp 1 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Advanced Linear Devices, Inc. Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
ALD1701GPAL IC OPAMP GP 1 CIRCUIT 8DIP 1,216 $4.2214 In Stock
ALD1701PAL IC OPAMP GP 1 CIRCUIT 8DIP 1,224 $4.2214 In Stock
ALD1701BPAL IC OPAMP GP 1 CIRCUIT 8DIP 936 $5.6286 In Stock
ALD1701ASAL IC OPAMP GP 1 CIRCUIT 8SOIC 879 $5.9386 In Stock
ALD1701SAL IC OPAMP GP 1 CIRCUIT 8SOIC 1,232 $4.2214 In Stock
ALD1701GSAL IC OPAMP GP 1 CIRCUIT 8SOIC 1,053 $4.9700 In Stock
ALD1701BSAL IC OPAMP GP 1 CIRCUIT 8SOIC 918 $5.6286 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

ALD1701APAL Specifications

Series -
Package Tube
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type Rail-to-Rail
Slew Rate 1V/µs
Gain Bandwidth Product 700 kHz
-3db Bandwidth -
Current - Input Bias 1 pA
Voltage - Input Offset 900 µV
Current - Supply 120µA
Current - Output / Channel 1 mA
Voltage - Supply, Single/Dual (±) 2V ~ 10V, ±1V ~ 5V
Operating Temperature 0°C ~ 70°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
ALD1706APAL IC OPAMP GP 1 CIRCUIT 8DIP 612 $8.8658 100%
TLC251ACP TLC251A PROGRAMMABLE LOW-POWER O 2,332 $2.1800 95%
TLC25L2ACP OPERATIONAL AMPLIFIER 5,984 $0.8400 95%
TLC25M2ACP TLC25M2A LINCMOS DUAL OPERATIONA 1,743 $2.9400 95%
ALD1702APAL IC OPAMP GP 1 CIRCUIT 8DIP 844 $6.1496 68%
TLC27L2ACP IC OPAMP GP 2 CIRCUIT 8DIP 3,126 $1.6200 60%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Advanced Linear Devices, Inc. Parts in Stock

Request a Quote

Need ALD1701APAL or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.