ADG936BCP-R-REEL7 Rochester Electronics component image

ADG936BCP-R-REEL7

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

WIDEBAND DUAL SPDT

Listed in RF Switches

2,352 pcs in stock ships same day before 6pm

from $2.1700

Quantity Unit Price
1+ $2.1700 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the ADG936BCP-R-REEL7?

ADG936BCP-R-REEL7 is a wideband dual spdt, featuring the 20-WFQFN Exposed Pad, CSP case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Rochester Electronics Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
ADG936BCP-R-500RL7 WIDEBAND DUAL SPDT 2,047 $2.5000 In Stock
ADG936BCP-REEL7 WIDEBAND DUAL SPDT 2,137 $2.3800 In Stock
ADG936BCP-R-REEL WIDEBAND DUAL SPDT 2,348 $2.1700 In Stock
ADG936BCP-REEL WIDEBAND DUAL SPDT 2,131 $2.3800 In Stock
ADG936BCP-500RL7 WIDEBAND DUAL SPDT 1,856 $2.7500 In Stock
ADG936BCP WIDEBAND DUAL SPDT 1,852 $2.7500 In Stock
ADG936BCP-R WIDEBAND DUAL SPDT 2,032 $2.5000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

ADG936BCP-R-REEL7 Specifications

Series -
Package Bulk
Part Status Obsolete
RF Type General Purpose
Topology Reflective
Circuit 2 x SPDT
Frequency Range -
Isolation -
Insertion Loss -
Test Frequency -
P1dB 16dBm (typ) P1dB
IIP3 32dBm (typ)
Features -
Impedance 50Ohm
Voltage - Supply 1.65V ~ 2.75V
Operating Temperature -40°C ~ 85°C
Package / Case 20-WFQFN Exposed Pad, CSP
Supplier Device Package 20-LFCSP-WQ (4x4)

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need ADG936BCP-R-REEL7 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.