ADG902BRM Rochester Electronics component image

ADG902BRM

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

WIDEBAND SPST SWITCH

Listed in RF Switches

3,154 pcs in stock ships same day before 6pm

from $1.6100

Quantity Unit Price
1+ $1.6100 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the ADG902BRM?

ADG902BRM is a wideband spst switch, featuring an insertion loss of 0.8dB, the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Rochester Electronics Series Variants in Stock

7 variants of this series in stock
Part Number Description Stock Unit Price Status
ADG902BRM-REEL7 WIDEBAND SPST SWITCH 3,150 $1.6100 In Stock
ADG901BCPZ-REEL7 WIDEBAND SPST SWITCH 3,866 $1.3100 In Stock
ADG902BCPZ-REEL7 WIDEBAND SPST SWITCH 3,861 $1.3100 In Stock
ADG901BRM-REEL7 WIDEBAND SPST SWITCH 3,154 $1.6100 In Stock
ADG902BRM-500RL7 WIDEBAND SPST SWITCH 3,293 $1.5400 In Stock
ADG901BRM-500RL7 WIDEBAND SPST SWITCH 2,859 $1.7700 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

ADG902BRM Specifications

Series -
Package Tube
Part Status Obsolete
RF Type General Purpose
Topology Reflective
Circuit SPST
Frequency Range 0Hz ~ 2.5GHz
Isolation 40dB
Insertion Loss 0.8dB
Test Frequency 1GHz
P1dB 17dBm
IIP3 36dBm
Features -
Impedance 50Ohm
Voltage - Supply 1.65V ~ 2.75V
Operating Temperature -40°C ~ 85°C
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package 8-MSOP

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
ADG901BRMZ IC RF SWITCH SPST 2.5GHZ 8MSOP 1,508 $3.3900 100%
ADG902BRMZ IC RF SWITCH SPST 2.5GHZ 8MSOP 1,511 $3.3900 100%
ADG918BRMZ IC RF SWITCH SPDT 2GHZ 8MSOP 1,448 $3.5500 94%
HMC190BMS8E IC RF SWITCH SPDT 3GHZ 8MSOP 1,174 $4.3700 56%
HMC190BMS8ETR IC RF SWITCH SPDT 3GHZ 8MSOP 1,248 $4.1300 56%
HMC194AMS8E IC RF SWITCH SPDT 3GHZ 8MSOP 1,002 $5.2200 52%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need ADG902BRM or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.