95NJ120E Ohmite component image

95NJ120E

In Stock

Ohmite logo Ohmite · franchised distributor

5W 120 OHMS VIT MOLD 5% NI

Listed in Through Hole Resistors

2,651 pcs in stock ships same day before 6pm

from $1.9189

Quantity Unit Price
1+ $1.9189 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 95NJ120E?

95NJ120E is a 5w 120 ohms vit mold 5% ni, featuring a power rating of 5W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

19 variants of this series in stock
Part Number Description Stock Unit Price Status
93J62RE 3.25W 62 OHMS VIT MOLD 5% 6,287 $0.8013 In Stock
93J900 3.25W 900 OHMS VIT MOLD 5% 6,888 $0.7296 In Stock
90J1K6E 11W 1K6 OHMS VIT MOLD 5% 4,791 $1.0500 In Stock
93J140E 3.25W 140 OHMS VIT MOLD 5% 6,079 $0.8272 In Stock
93J12K 3.25W 12K OHMS VIT MOLD 5% 3,725 $1.3543 In Stock
90J51K 11W 51K OHMS VIT MOLD 5% 2,853 $1.7800 In Stock
91J50RE 1.5W 50 OHMS VIT MOLD 5% 3,577 $1.4173 In Stock
90J430E 11W 430 OHMS VIT MOLD 5% 4,908 $1.0267 In Stock
92J4R7E-B 2.25W 4.7 OHMS VIT MOLD 5% 4,114 $1.2253 In Stock
91J1K1E 1.5W 1K1 OHMS VIT MOLD 5% 2,644 $1.9228 In Stock
+ 9 more variants in stock — browse the full category

Technical Parameters

95NJ120E Specifications

Series 90
Package Bulk
Part Status Active
Resistance 120 Ohms
Tolerance ±5%
Power (Watts) 5W
Composition Wirewound
Features Flame Retardant Coating, Safety
Temperature Coefficient ±30ppm/°C
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.264" Dia x 0.969" L (6.70mm x 24.60mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
93J120E RES 120 OHM 5% 3.25W AXIAL 1,953 $2.6250 79%
93J120 RES 120 OHM 5% 3.25W AXIAL 1,814 $2.8175 79%
90J120E RES 120 OHM 5% 11W AXIAL 1,172 $4.3840 67%
22J120E RES 120 OHM 5% 2W AXIAL 4,595 $1.0980 67%
22J120 RES 120 OHM 5% 2W AXIAL 3,404 RFQ 67%
21J120 RES 120 OHM 5% 1W AXIAL 4,465 RFQ 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 95NJ120E or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.