95J75RE Ohmite component image

95J75RE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 75 OHM 5% 5W AXIAL

Listed in Through Hole Resistors

1,063 pcs in stock ships same day before 6pm

from $2.3552

Quantity Unit Price
1 - 9 $4.8600
10 - 24 $4.3927
25 - 49 $4.0189
50 - 99 $3.7385
100 - 249 $3.2712
250 - 499 $2.8039
500 - 999 $2.5702
1,000+ $2.3552 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 95J75RE?

95J75RE is a res 75 ohm 5% 5w axial, featuring a power rating of 5W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
5906 MOUNTING CLIPS D8212-5 295 $19.3300 In Stock
5908 MOUNTING CLIPS D8212-9 294 $20.0500 In Stock
90J10KE RES 10K OHM 5% 11W AXIAL 721 $7.2480 In Stock
95J50R RES 50 OHM 5% 5W AXIAL 977 $5.3600 In Stock
95J2K5 RES 2.5K OHM 5% 5W AXIAL 969 $5.3280 In Stock
93J200 RES 200 OHM 3.25W 5% AXIAL 1,667 $3.0600 In Stock
90J1R0 RES 1 OHM 5% 11W AXIAL 2,922 RFQ In Stock
95J10K RES 10K OHM 5% 5W AXIAL 815 $6.4960 In Stock
95J150 RES 150 OHM 5% 5W AXIAL 1,421 $3.6050 In Stock
95J500 RES 500 OHM 5% 5W AXIAL 807 $6.4500 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

95J75RE Specifications

Series 90
Package Bulk
Part Status Active
Resistance 75 Ohms
Tolerance ±5%
Power (Watts) 5W
Composition Wirewound
Features Flame Retardant Coating, Safety
Temperature Coefficient ±30ppm/°C
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.264" Dia x 0.969" L (6.70mm x 24.60mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
25J75RE RES 75 OHM 5% 5W AXIAL 3,948 $1.2780 100%
RWR74S75R0FRS73 RES 75 OHM 5W 1% WW AXIAL 1,272 $4.0770 75%
RWR74S73R2FSB12 RES 73.2 OHM 5W 1% WW AXIAL 751 $7.0720 74%
RWR74S73R2FSRSL RES 73.2 OHM 5W 1% WW AXIAL 705 $7.5668 74%
RWR74S73R2FSBSL RES 73.2 OHM 5W 1% WW AXIAL 690 $7.5668 74%
20J75RE RES 75 OHM 5% 10W AXIAL 1,866 $2.7300 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 95J75RE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.