90NJ6K0E Ohmite component image

90NJ6K0E

In Stock

Ohmite logo Ohmite · franchised distributor

11W 6K OHMS VIT MOLD 5%

Listed in Through Hole Resistors

2,297 pcs in stock ships same day before 6pm

from $2.2167

Quantity Unit Price
1+ $2.2167 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 90NJ6K0E?

90NJ6K0E is a 11w 6k ohms vit mold 5%, featuring a power rating of 10W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Ohmite Series Variants in Stock

19 variants of this series in stock
Part Number Description Stock Unit Price Status
93J62RE 3.25W 62 OHMS VIT MOLD 5% 6,287 $0.8013 In Stock
93J900 3.25W 900 OHMS VIT MOLD 5% 6,888 $0.7296 In Stock
90J1K6E 11W 1K6 OHMS VIT MOLD 5% 4,791 $1.0500 In Stock
93J140E 3.25W 140 OHMS VIT MOLD 5% 6,079 $0.8272 In Stock
93J12K 3.25W 12K OHMS VIT MOLD 5% 3,725 $1.3543 In Stock
90J51K 11W 51K OHMS VIT MOLD 5% 2,853 $1.7800 In Stock
91J50RE 1.5W 50 OHMS VIT MOLD 5% 3,577 $1.4173 In Stock
90J430E 11W 430 OHMS VIT MOLD 5% 4,908 $1.0267 In Stock
92J4R7E-B 2.25W 4.7 OHMS VIT MOLD 5% 4,114 $1.2253 In Stock
91J1K1E 1.5W 1K1 OHMS VIT MOLD 5% 2,644 $1.9228 In Stock
+ 9 more variants in stock — browse the full category

Technical Parameters

90NJ6K0E Specifications

Series 90
Package Bulk
Part Status Active
Resistance 6 kOhms
Tolerance ±5%
Power (Watts) 10W
Composition Wirewound
Features Flame Retardant Coating, Safety
Temperature Coefficient ±30ppm/°C
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.343" Dia x 1.811" L (8.70mm x 46.00mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CPW106K000JE14 RES 6K OHM 10W 5% AXIAL 111 $80.0000 100%
90J6K0 RES 6K OHM 5% 11W AXIAL 2,798 RFQ 95%
90J6K0E RES 6K OHM 11W 5% AXIAL 629 $8.5900 95%
CW0106K000JB123 RES 6K OHM 13W 5% AXIAL 2,655 $1.9166 87%
CW0106K190JB12 RES 6.19K OHM 13W 5% AXIAL 2,645 $1.9166 86%
CW0056K000JE73 RES 6K OHM 6.5W 5% AXIAL 7,920 $0.6352 79%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 90NJ6K0E or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.