5WD10 NTE Electronics, Inc. component image

5WD10

In Stock

NTE Electronics, Inc. logo NTE Electronics, Inc. · franchised distributor

5W .10 OHM 5%

Listed in Through Hole Resistors

8,978 pcs in stock ships same day before 6pm

from $0.5600

Quantity Unit Price
1+ $0.5600 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 5WD10?

5WD10 is a 5w .10 ohm 5%, featuring a power rating of 5W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

NTE Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
5W156 5W 560 OHM 5% 8,971 $0.5600 In Stock
5W122 5W 220 OHM 5% 8,970 $0.5600 In Stock
5W015 5W 15 OHM 5% 8,961 $0.5600 In Stock
5W047 5W 47 OHM 5% 8,961 $0.5600 In Stock
5W082 5W 82 OHM 5% 8,964 $0.5600 In Stock
5W233 5W 3.3K OHM 5% 8,965 $0.5600 In Stock
5WD47 5W .47 OHM 5% 8,964 $0.5600 In Stock
5W182 5W 820 OHM 5% 8,970 $0.5600 In Stock
5W2D7 5W 2.7 OHM 5% 8,972 $0.5600 In Stock
5W6D8 5W 6.8 OHM 5% 8,967 $0.5600 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

5WD10 Specifications

Series -
Package Bag
Part Status Active
Resistance 100 mOhms
Tolerance ±5%
Power (Watts) 5W
Composition Wirewound
Features -
Temperature Coefficient ±300ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.380" Square x 0.866" L (9.65mm x 22.00mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
10WD10 10W .10 OHM 5% 8,105 $0.6200 67%
CPL05R1000JE313 RES 0.1 OHM 5W 5% AXIAL 3,149 $1.6065 100%
CPL07R1000JB313 RES 0.1 OHM 7W 5% AXIAL 2,597 $1.9530 84%
CPL05R1000FB313 RES 0.1 OHM 5W 1% AXIAL 1,611 $3.1815 75%
CPL10R1000JE143 RES 0.1 OHM 10W 5% AXIAL 92 $80.0000 67%
CPL15R1000JB31 RES 0.1 OHM 15W 5% AXIAL 2,681 $1.8900 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

NTE Electronics, Inc. Parts in Stock

Request a Quote

Need 5WD10 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.