4775-6 MITEQ, Inc.(L3 Narda-MITEQ) component image

4775-6

In Stock

MITEQ, Inc.(L3 Narda-MITEQ) logo MITEQ, Inc.(L3 Narda-MITEQ) · franchised distributor

RF ATTENUATOR 6DB SMA MODULE

Listed in Attenuators

55 pcs in stock ships same day before 6pm

from $324.5902

Quantity Unit Price
1 - 9 $360.0000
10 - 24 $336.3934
25+ $324.5902 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 4775-6?

4775-6 is a rf attenuator 6db sma module, featuring the SMA In-Line Module case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

MITEQ, Inc.(L3 Narda-MITEQ) Series Variants in Stock

13 variants of this series in stock
Part Number Description Stock Unit Price Status
4777-3 RF ATTENUATOR 3DB SMA MODULE 54 $610.0000 In Stock
4776-3 RF ATTENUATOR 3DB SMA MODULE 52 $411.7500 In Stock
4776-30 RF ATTENUATOR 30DB SMA MODULE 59 $488.0000 In Stock
4777-6 RF ATTENUATOR 6DB SMA MODULE 39 $610.0000 In Stock
4776-40 RF ATTENUATOR 40DB SMA MODULE 43 $549.0000 In Stock
4775-3 RF ATTENUATOR 3DB SMA MODULE 1,640 RFQ In Stock
4777-20 RF ATTENUATOR 20DB SMA MODULE 44 $610.0000 In Stock
4776-6 RF ATTENUATOR 6DB SMA MODULE 56 $457.5000 In Stock
4776-10 RF ATTENUATOR 10DB SMA MODULE 47 $419.3800 In Stock
4776-20 RF ATTENUATOR 20DB SMA MODULE 56 $419.3800 In Stock
+ 3 more variants in stock — browse the full category

Technical Parameters

4775-6 Specifications

Series -
Package Bulk
Part Status Active
Attenuation Value 6dB
Frequency Range 0 Hz ~ 12.4 GHz
Power (Watts) 5.5W
Impedance -
Package / Case SMA In-Line Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
M3933/14-22N RF ATTENUATOR 11DB 50OHM SMA 76 $136.9758 100%
M3933/14-02N RF ATTENUATOR 6DB 50OHM SMA 75 $117.7443 100%
M3933/14-11N RF ATTENUATOR 8DB 50OHM SMA 79 $117.7443 100%
M3933/14-09N RF ATTENUATOR 5DB 50OHM SMA 79 $117.7443 100%
M3933/25-27N RF ATTENUATOR 1DB 50OHM SMA 83 $116.0321 63%
M3933/14-06N RF ATTENUATOR 1DB 50OHM SMA 81 $147.0160 63%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

MITEQ, Inc.(L3 Narda-MITEQ) Parts in Stock

Request a Quote

Need 4775-6 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.