43NF250E Ohmite component image

43NF250E

In Stock

Ohmite logo Ohmite · franchised distributor

3W 250 OHMS SILICONE 1% NI

Listed in Through Hole Resistors

4,271 pcs in stock ships same day before 6pm

from $1.1825

Quantity Unit Price
1+ $1.1825 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 43NF250E?

43NF250E is a 3w 250 ohms silicone 1% ni, featuring a power rating of 3W, a tolerance of ±1%, a Wirewound composition, and the Axial case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
45F40KE 5W 40K OHMS SILICONE 1% 3,325 $1.5240 In Stock
45095TE57U-15R 95W 15 OHMS SILI 5% 988 $5.3300 In Stock
45J650E 5W 650 OHMS SILICONE 5% 5,049 $1.0000 In Stock
45J50KE 5W 50K OHMS SILICONE 5% 2,500 $2.0340 In Stock
47JR20E 7W 0.2 OHM SILICONE 5% 3,968 $1.2700 In Stock
40J2K0E-B 10W 2K0 OHMS SILICONE 5% 5,828 $0.8648 In Stock
40NJ100E 10W 100 OHMS SILICONE 5% 3,758 $1.3450 In Stock
43F4R3E-T 3W 4.3 OHMS SILICONE 1% 12,471 $0.4024 In Stock
40NF20RE 10W 20 OHMS SILICONE 1% 3,830 $1.3168 In Stock
45095TE57SS-1R5 95W 1.5 OHMS SILI 5% 758 $6.9811 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

43NF250E Specifications

Series 40
Package Bulk
Part Status Active
Resistance 250 Ohms
Tolerance ±1%
Power (Watts) 3W
Composition Wirewound
Features Non-Inductive
Temperature Coefficient ±20ppm/°C
Operating Temperature -55°C ~ 275°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.220" Dia x 0.594" L (5.60mm x 15.10mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
WNA250FE RES 250 OHM 1% 1/2W AXIAL 971 RFQ 100%
RWR89S2520DSB12 RES 252 OHM 3W 0.5% WW AXIAL 460 $11.8860 84%
WNC250FE RES 250 OHM 1% 2W AXIAL 3,138 RFQ 81%
WHC250FET RES 250 OHM 2W 1% AXIAL 9,132 $0.5500 81%
RWR80S2520DRBSL RES 252 OHM 2W 0.5% WW AXIAL 451 $12.0960 64%
RWR80S2520DRRSL RES 252 OHM 2W 0.5% WW AXIAL 446 $12.0960 64%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 43NF250E or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.