4202AB51K04720 Laird - Performance Materials component image

4202AB51K04720

In Stock

Laird - Performance Materials logo Laird - Performance Materials · franchised distributor

GASKT FAB/FOAM 6.4X1199MM DSHAPE

Listed in RFI and EMI - Contacts, Fingerstock and Gaskets

375 pcs in stock ships same day before 6pm

from $7.9973

Quantity Unit Price
1 - 9 $14.8100
10 - 24 $13.3290
25 - 99 $12.1440
100 - 249 $10.9592
250 - 499 $10.0706
500 - 999 $9.1820
1,000+ $7.9973 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 4202AB51K04720?

4202AB51K04720 is a gaskt fab/foam 6.4x1199mm dshape, featuring the Bulk package. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Laird - Performance Materials Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
BMI-S-107 RF SHIELD 1.747"X1.747" SLDR 1PC 1,328 $3.8900 In Stock
BMI-S-226-F RF SHIELD SOLDER 1,504 $3.4340 In Stock
BMI-S-208-F RF SHIELD 1.559" X 1.559" SOLDER 1,646 $3.1100 In Stock
BMI-S-103 RF SHIELD 1.032"X1.032" SLDR 1PC 2,328 $2.1800 In Stock
BMI-S-209-F RF SHIELD 0.728" X 1.156" SOLDER 3,110 $1.6300 In Stock
BMI-S-205-C RF SHIELD 1.018"X1.518" ADHESIVE 4,630 $1.0900 In Stock
BMI-S-203-C RF SHIELD 1.05" X 1.05" SNAP FIT 3,116 $1.6300 In Stock
BMI-S-230-F-R RF SHIELD 2" X 1.5" SOLDER 3,364 $1.5000 In Stock
BMI-S-102 RF SHIELD 0.65"X0.65" SOLDER 1PC 2,765 $1.8400 In Stock
BMI-S-104 RF SHIELD 1.26"X1.26" SOLDER 1PC 2,000 $2.5600 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

4202AB51K04720 Specifications

Series 51K
Package Bulk
Part Status Active
Type Fabric Over Foam
Shape D-Shape
Width 0.252" (6.40mm)
Length 47.200" (119.89cm)
Height 0.118" (3.00mm)
Material Polyurethane Foam, Nickel-Copper Polyester (NI/CU)
Plating -
Plating - Thickness -
Attachment Method -
Operating Temperature -

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Laird - Performance Materials Parts in Stock

Request a Quote

Need 4202AB51K04720 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.