40J50K Ohmite component image

40J50K

In Stock

Ohmite logo Ohmite · franchised distributor

10W 50K OHMS SILICONE 5%

Listed in Through Hole Resistors

4,072 pcs in stock ships same day before 6pm

from $1.2422

Quantity Unit Price
1+ $1.2422 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 40J50K?

40J50K is a 10w 50k ohms silicone 5%, featuring a power rating of 10W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
45F40KE 5W 40K OHMS SILICONE 1% 3,325 $1.5240 In Stock
45095TE57U-15R 95W 15 OHMS SILI 5% 988 $5.3300 In Stock
45J650E 5W 650 OHMS SILICONE 5% 5,049 $1.0000 In Stock
45J50KE 5W 50K OHMS SILICONE 5% 2,500 $2.0340 In Stock
47JR20E 7W 0.2 OHM SILICONE 5% 3,968 $1.2700 In Stock
40J2K0E-B 10W 2K0 OHMS SILICONE 5% 5,828 $0.8648 In Stock
40NJ100E 10W 100 OHMS SILICONE 5% 3,758 $1.3450 In Stock
43F4R3E-T 3W 4.3 OHMS SILICONE 1% 12,471 $0.4024 In Stock
40NF20RE 10W 20 OHMS SILICONE 1% 3,830 $1.3168 In Stock
45095TE57SS-1R5 95W 1.5 OHMS SILI 5% 758 $6.9811 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

40J50K Specifications

Series 40
Package Bulk
Part Status Active
Resistance 50 kOhms
Tolerance ±5%
Power (Watts) 10W
Composition Wirewound
Features -
Temperature Coefficient ±20ppm/°C
Operating Temperature -55°C ~ 275°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.406" Dia x 1.902" L (10.30mm x 48.30mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
40F50K RES 50K OHM 1% 10W AXIAL 2,948 RFQ 75%
40F50KE RES 50K OHM 1% 10W AXIAL 2,417 $2.0960 75%
RS01050K00FS73 RES 50K OHM 10W 1% WW AXIAL 1,528 $3.3412 75%
RS01050K00FE73 RES 50K OHM 10W 1% WW AXIAL 1,688 $3.0388 75%
80F49K9 RES 49.9K OHM 1% 10W AXIAL 606 RFQ 75%
80F51K1 RES 51.1K OHM 10W 1% AXIAL 1,243 $4.1400 74%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 40J50K or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.