4052AC51H00071 Laird - Performance Materials component image

4052AC51H00071

In Stock

Laird - Performance Materials logo Laird - Performance Materials · franchised distributor

GASKET FAB/FOAM 2.03X18MM DSHAPE

Listed in RFI and EMI - Contacts, Fingerstock and Gaskets

40,996 pcs in stock ships same day before 6pm

from $0.1221

Quantity Unit Price
1 - 2,046 $0.1221 BEST
2,047+ $0.1221 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 4052AC51H00071?

4052AC51H00071 is a gasket fab/foam 2.03x18mm dshape, featuring the Bulk package. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Laird - Performance Materials Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
4DD9AB51H01800 RF EMI ULTRASOFT GASKET FABRIC 1,379 $3.7500 In Stock
4795PA51H01800 GASKET FAB/FOAM 12.7X457.2MM REC 961 $5.4800 In Stock
4176PA51H01800 GASKET FAB/FOAM 20X457.2MM RECT 995 $5.2499 In Stock
4247PA51H01800 GASKT FAB/FOAM 17.8X457.2MM RECT 1,317 $3.9153 In Stock
4692PA51H01800 GSKT FAB/FOAM 6.4X457.2MM DSHAPE 1,467 $3.5000 In Stock
4094PA51H01800 GASKET FAB/FOAM 4.1X457.2MM RECT 1,761 $2.8900 In Stock
4186PA51H01800 GASKET FAB/FOAM 5.1X457.2MM RECT 1,767 $2.8900 In Stock
4240PA51H01800 GASKT FAB/FOAM 7.62X457.2MM DSHP 1,742 $2.9400 In Stock
4053PA51H01800 GSKT FAB/FOAM 2.3X457.2MM DSHAPE 1,779 $2.8800 In Stock
4246PA51H01800 GASKET FAB/FOAM 2.3X457.2MM RECT 1,869 $2.7400 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

4052AC51H00071 Specifications

Series 51H
Package Bulk
Part Status Active
Type Fabric Over Foam
Shape D-Shape
Width 0.079" (2.00mm)
Length 0.710" (18.03mm)
Height 0.079" (2.00mm)
Material Polyurethane Foam, Nickel-Copper Taffeta (NI/CU)
Plating -
Plating - Thickness -
Attachment Method Adhesive
Operating Temperature -

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Laird - Performance Materials Parts in Stock

Request a Quote

Need 4052AC51H00071 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.