35J22RE Ohmite component image

35J22RE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 22 OHM 5% 5W AXIAL

Listed in Through Hole Resistors

1,978 pcs in stock ships same day before 6pm

from $1.0458

Quantity Unit Price
1 - 9 $2.5700
10 - 24 $2.2830
25 - 49 $2.1164
50 - 99 $1.9920
100 - 249 $1.7430
250 - 499 $1.4940
500 - 999 $1.2450
1,000 - 4,999 $1.0790
5,000+ $1.0458 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 35J22RE?

35J22RE is a res 22 ohm 5% 5w axial, featuring a power rating of 5W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
33J25RE RES 25 OHM 3W 5% AXIAL 4,992 $1.0100 In Stock
35J1R5E RES 1.5 OHM 5% 5W AXIAL 1,653 $3.0800 In Stock
30J150 RES 150 OHM 10W 5% AXIAL 2,332 $2.1900 In Stock
35J18R RES 18 OHM 5% 5W AXIAL 2,257 RFQ In Stock
30J33RE RES 33 OHM 5% 10W AXIAL 2,433 $2.0800 In Stock
35J1R5 RES 1.5 OHM 5% 5W AXIAL 2,692 $1.8880 In Stock
33J1R0 RES 1 OHM 5% 3W AXIAL 4,321 $1.1700 In Stock
35J75RE RES 75 OHM 5W 5% AXIAL 3,507 $1.4400 In Stock
35J22R RES 22 OHM 5% 5W AXIAL 2,484 RFQ In Stock
33J1R0E RES 1 OHM 5% 3W AXIAL 4,679 $1.0800 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

35J22RE Specifications

Series 30
Package Bulk
Part Status Active
Resistance 22 Ohms
Tolerance ±5%
Power (Watts) 5W
Composition Wirewound
Features -
Temperature Coefficient -
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.343" Dia x 1.000" L (8.70mm x 25.40mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
FKN5WSJR-73-22R RES 22 OHM 5W 5% AXIAL 27,449 $0.1824 100%
PNP5WVJR-73-22R RES 22 OHM 5W 5% AXIAL 35,508 $0.1410 100%
SQP500JB-24R RES 24 OHM 5W 5% AXIAL 7,978 $0.6300 95%
FKN300JR-73-22R RES 22 OHM 3W 5% AXIAL 64,461 $0.0776 75%
PNP1WVJR-73-22R RES 22 OHM 1W 5% AXIAL 93,406 $0.0536 67%
PNP1WVJR-52-22R RES 22 OHM 1W 5% AXIAL 63,294 $0.0790 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 35J22RE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.