337SAK010M Cornell Dubilier Electronics component image

337SAK010M

In Stock

Cornell Dubilier Electronics logo Cornell Dubilier Electronics · franchised distributor

CAP ALUM 330UF 20% 10V THRU HOLE

Listed in Aluminum Electrolytic Capacitors

29,046 pcs in stock ships same day before 6pm

from $0.1645

Quantity Unit Price
1 - 39,999 $0.1723
40,000+ $0.1645 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 337SAK010M?

337SAK010M is a cap alum 330uf 20% 10v thru hole, featuring a capacitance of 330 µF, a rated voltage of 10 V, a tolerance of ±20%, and the Radial, Can case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Cornell Dubilier Electronics Series Variants in Stock

41 variants of this series in stock
Part Number Description Stock Unit Price Status
228SAK025M CAP ALUM 2200UF 20% 25V T/H 10,265 $0.4890 In Stock
108SAK035M CAP ALUM 1000UF 20% 35V T/H 17,144 $0.2922 In Stock
478SAK6R3M CAP ALUM 4700UF 20% 6.3V T/H 8,327 $0.6039 In Stock
476SAK050M CAP ALUM 47UF 20% 50V THRU HOLE 62,385 $0.0802 In Stock
108SAK025M CAP ALUM 1000UF 20% 25V T/H 18,658 $0.2686 In Stock
227SAK100M CAP ALUM 220UF 20% 100V T/H 14,412 $0.3479 In Stock
228SAK016M CAP ALUM 2200UF 20% 16V T/H 13,677 $0.3666 In Stock
107SAK010M CAP ALUM 100UF 20% 10V THRU HOLE 92,798 $0.0539 In Stock
107SAK025M CAP ALUM 100UF 20% 25V THRU HOLE 61,802 $0.0810 In Stock
107SAK050M CAP ALUM 100UF 20% 50V THRU HOLE 44,764 $0.1118 In Stock
+ 31 more variants in stock — browse the full category

Technical Parameters

337SAK010M Specifications

Series SAK
Package Bulk
Part Status Active
Capacitance 330 µF
Tolerance ±20%
Voltage - Rated 10 V
ESR (Equivalent Series Resistance) 1.206Ohm @ 120Hz
Lifetime @ Temp. 2000 Hrs @ 85°C
Operating Temperature -40°C ~ 85°C
Polarization Polar
Ratings -
Applications General Purpose
Ripple Current @ Low Frequency 300 mA @ 120 Hz
Ripple Current @ High Frequency 450 mA @ 10 kHz
Impedance -
Lead Spacing 0.138" (3.50mm)
Size / Dimension 0.315" Dia (8.00mm)
Height - Seated (Max) 0.413" (10.50mm)
Surface Mount Land Size -
Mounting Type Through Hole
Package / Case Radial, Can

Buying Guide

Choosing Capacitors

Selecting a capacitor means matching the dielectric to the job: Class 1 ceramics (C0G/NP0) for timing, RF and precision filtering; Class 2 (X7R/X5R) for decoupling where value drift is tolerable; aluminum electrolytic or polymer for bulk storage; film for AC line and precision analog; tantalum/niobium where stable capacitance in a small footprint matters most. Order of checks: capacitance at operating voltage (MLCCs lose 30–60% of nominal value near rated voltage — derate to 50–80%), temperature range vs dielectric code (X7R = −55~+125°C), tolerance, and ripple current rating in power paths. For switching regulators, verify the ESR window the controller expects. In decoupling banks, mix a bulk MLCC with a small 100 nF per device pin for broadband impedance.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SK471M010ST CAP ALUM 470UF 20% 10V RADIAL 24,803 $0.2018 100%
B41821A3277M000 CAP ALUM 270UF 20% 10V RADIAL 2,601 RFQ 100%
477SAK010MV CAP ALUM 470UF 20% 10V TH 75,524 $0.0662 100%
10PK1000MEFC8X11.5 CAP ALUM 1000UF 20% 10V RADIAL 12,850 $0.3900 100%
UKL1A221MPD1TA CAP ALUM 220UF 20% 10V THRU HOLE 36,268 $0.1380 100%
URS1A331MPD1TD CAP ALUM 330UF 20% 10V RADIAL 12,863 $0.3900 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Cornell Dubilier Electronics Parts in Stock

Request a Quote

Need 337SAK010M or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.