30J4R7 Ohmite component image

30J4R7

In Stock

Ohmite logo Ohmite · franchised distributor

RES 4.7 OHM 5% 10W AXIAL

Listed in Through Hole Resistors

1,958 pcs in stock ships same day before 6pm

from $2.5950

Quantity Unit Price
1 - 249 $2.5950 BEST
250+ $2.5950 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 30J4R7?

30J4R7 is a res 4.7 ohm 5% 10w axial, featuring a power rating of 10W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
33J25RE RES 25 OHM 3W 5% AXIAL 4,992 $1.0100 In Stock
35J1R5E RES 1.5 OHM 5% 5W AXIAL 1,653 $3.0800 In Stock
30J150 RES 150 OHM 10W 5% AXIAL 2,332 $2.1900 In Stock
35J18R RES 18 OHM 5% 5W AXIAL 2,257 RFQ In Stock
30J33RE RES 33 OHM 5% 10W AXIAL 2,433 $2.0800 In Stock
35J1R5 RES 1.5 OHM 5% 5W AXIAL 2,692 $1.8880 In Stock
33J1R0 RES 1 OHM 5% 3W AXIAL 4,321 $1.1700 In Stock
35J75RE RES 75 OHM 5W 5% AXIAL 3,507 $1.4400 In Stock
35J22R RES 22 OHM 5% 5W AXIAL 2,484 RFQ In Stock
33J1R0E RES 1 OHM 5% 3W AXIAL 4,679 $1.0800 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

30J4R7 Specifications

Series 30
Package Bulk
Part Status Active
Resistance 4.7 Ohms
Tolerance ±5%
Power (Watts) 10W
Composition Wirewound
Features -
Temperature Coefficient -
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.406" Dia x 1.843" L (10.30mm x 46.80mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
FKN7WSJR-91-4R7 RES 4.7 OHM 7W 5% AXIAL 20,991 $0.2386 83%
FKN2WSJR-73-4R7 RES 4.7 OHM 2W 5% AXIAL 70,891 $0.0706 67%
PNP300JR-73-4R7 RES 4.7 OHM 3W 5% AXIAL 8,958 $0.5600 67%
FKN1WSJR-52-4R7 RES 4.7 OHM 1W 5% AXIAL 13,920 $0.3600 67%
FKN100JR-73-4R7 RES 4.7 OHM 1W 5% AXIAL 86,402 $0.0579 67%
FKN400JR-73-4R7 RES 4.7 OHM 4W 5% AXIAL 64,015 $0.0782 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 30J4R7 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.