30J2R0E Ohmite component image

30J2R0E

In Stock

Ohmite logo Ohmite · franchised distributor

RES 2 OHM 5% 10W AXIAL

Listed in Through Hole Resistors

1,233 pcs in stock ships same day before 6pm

from $1.9200

Quantity Unit Price
1 - 9 $4.1600
10 - 24 $3.7600
25 - 49 $3.4400
50 - 99 $3.2000
100 - 249 $2.8000
250 - 499 $2.4000
500 - 999 $2.2000
1,000 - 4,999 $2.0160
5,000+ $1.9200 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 30J2R0E?

30J2R0E is a res 2 ohm 5% 10w axial, featuring a power rating of 10W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
33J25RE RES 25 OHM 3W 5% AXIAL 4,992 $1.0100 In Stock
35J1R5E RES 1.5 OHM 5% 5W AXIAL 1,653 $3.0800 In Stock
30J150 RES 150 OHM 10W 5% AXIAL 2,332 $2.1900 In Stock
35J18R RES 18 OHM 5% 5W AXIAL 2,257 RFQ In Stock
30J33RE RES 33 OHM 5% 10W AXIAL 2,433 $2.0800 In Stock
35J1R5 RES 1.5 OHM 5% 5W AXIAL 2,692 $1.8880 In Stock
33J1R0 RES 1 OHM 5% 3W AXIAL 4,321 $1.1700 In Stock
35J75RE RES 75 OHM 5W 5% AXIAL 3,507 $1.4400 In Stock
35J22R RES 22 OHM 5% 5W AXIAL 2,484 RFQ In Stock
33J1R0E RES 1 OHM 5% 3W AXIAL 4,679 $1.0800 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

30J2R0E Specifications

Series 30
Package Bulk
Part Status Active
Resistance 2 Ohms
Tolerance ±5%
Power (Watts) 10W
Composition Wirewound
Features -
Temperature Coefficient -
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.406" Dia x 1.843" L (10.30mm x 46.80mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SQP10AJB-2R0 RES 2 OHM 10W 5% AXIAL 6,215 $0.8100 100%
NKN-50JR-52-2R RES 2 OHM 1/2W 5% AXIAL 128,741 $0.0389 100%
NKN-50JT-52-2R RES 2 OHM 1/2W 5% AXIAL 238,139 $0.0210 100%
NKN7WSJR-91-2R RES 2 OHM 7W 5% AXIAL 17,047 $0.2940 83%
PSP900KB-1R8 RES 1.8 OHM 9W 10% AXIAL 8,125 $0.6189 73%
KNP100JR-73-2R RES 2 OHM 1W 5% AXIAL 10,915 $0.4600 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 30J2R0E or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.