2W411 NTE Electronics, Inc. component image

2W411

In Stock

NTE Electronics, Inc. logo NTE Electronics, Inc. · franchised distributor

2W 110K OHMS 2%

Listed in Through Hole Resistors

31,293 pcs in stock ships same day before 6pm

from $0.1600

Quantity Unit Price
1+ $0.1600 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 2W411?

2W411 is a 2w 110k ohms 2%, featuring a power rating of 2W, a tolerance of ±2%, a Metal Oxide Film composition, and the Axial case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

NTE Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
261-12-RC 1W METAL OXIDE PWR RESISTOR 12 33,377 $0.1500 In Stock
2W615 2W 15 MEG OHM 2% 12,534 $0.4000 In Stock
2W233 2W 3.3K OHMS 2% 31,288 $0.1600 In Stock
262-560-RC RES 560 OHM 5% 2W AXIAL 33,375 $0.1500 In Stock
2W475 2W 750K OHMS 2% 31,286 $0.1600 In Stock
2W182 2W 820 OHMS 2% 31,290 $0.1600 In Stock
1W382 RES-1W 82K OHM 2% 33,372 $0.1500 In Stock
261-51-RC 1W METAL OXIDE PWR RESISTOR 51 33,363 $0.1500 In Stock
2W333 2W 33K OHMS 2% 31,297 $0.1600 In Stock
2WD82 2W 0.82 OHM 5% 31,289 $0.1600 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

2W411 Specifications

Series -
Package Bag
Part Status Active
Resistance 110 kOhms
Tolerance ±2%
Power (Watts) 2W
Composition Metal Oxide Film
Features Flame Proof, Safety
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 200°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.220" Dia x 0.610" L (5.60mm x 15.50mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
QW411 1/4W 110K OHM 2% 50,042 $0.1000 100%
HW411 1/2W 110K OHM 2% 33,383 $0.1500 100%
EW411 1/8W 110K OHM 2% 50,037 $0.1000 100%
RSF12FT110K RES 110K OHM 1/2W 1% AXIAL 81,439 $0.0614 76%
1W411 RES-1W 110K OHM 2% 33,378 $0.1500 67%
RNX025110KFNR8 RES 110K OHM 1% 1/2W AXIAL 1,609 $3.2053 76%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

NTE Electronics, Inc. Parts in Stock

Request a Quote

Need 2W411 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.