25W110 NTE Electronics, Inc. component image

25W110

In Stock

NTE Electronics, Inc. logo NTE Electronics, Inc. · franchised distributor

25W 100 OHM 5%

Listed in Through Hole Resistors

4,552 pcs in stock ships same day before 6pm

from $1.1100

Quantity Unit Price
1+ $1.1100 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 25W110?

25W110 is a 25w 100 ohm 5%, featuring a power rating of 25W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

NTE Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
25W027 25W 27 OHM 5% 4,543 $1.1100 In Stock
25WD27 25W .27 OHM 5% 4,538 $1.1100 In Stock
25W4D7 25 W 4.7 OHM 5% 4,552 $1.1100 In Stock
25W282 25W 8.2K OHM 5% 4,541 $1.1100 In Stock
25WD43 25W .43 OHM 5% 4,536 $1.1100 In Stock
25W112 25W 120 OHM 5% 4,546 $1.1100 In Stock
25W139 25W 390 OHM 5% 4,536 $1.1100 In Stock
25W020 25W 20 OHM 5% 4,549 $1.1100 In Stock
25W6D8 25W 6.8 OHM 5% 4,544 $1.1100 In Stock
25W115 25W 150 OHM 5% 4,544 $1.1100 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

25W110 Specifications

Series -
Package Bag
Part Status Active
Resistance 100 Ohms
Tolerance ±5%
Power (Watts) 25W
Composition Wirewound
Features -
Temperature Coefficient ±300ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.492" Square x 2.50" L (12.50mm x 63.50mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CP0022100R0JJ01 RES 100 OHM 22W 5% AXIAL 2,915 $1.7346 94%
CP0015100R0JE143 RES 100 OHM 15W 5% AXIAL 304 $19.0000 75%
KNP2WSJR-52-100R RES WW 2W 5% AXIAL 82,412 $0.0607 67%
CA0001100R0JB14 RES 100 OHM 1W 5% AXIAL 534 $10.0000 67%
FKN3SSJR-73-100R RES WW 3W 5% AXIAL 47,620 $0.1051 67%
CP0002100R0JE1485 RES 100 OHM 2W 5% AXIAL 546 $10.0000 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

NTE Electronics, Inc. Parts in Stock

Request a Quote

Need 25W110 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.