25J47RE Ohmite component image

25J47RE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 47 OHM 5% 5W AXIAL

Listed in Through Hole Resistors

2,307 pcs in stock ships same day before 6pm

from $0.8946

Quantity Unit Price
1 - 9 $2.2000
10 - 24 $1.9530
25 - 49 $1.8104
50 - 99 $1.7040
100 - 249 $1.4910
250 - 499 $1.2780
500 - 999 $1.0650
1,000 - 4,999 $0.9230
5,000+ $0.8946 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 25J47RE?

25J47RE is a res 47 ohm 5% 5w axial, featuring a power rating of 5W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
23J6K0 RES 6K OHM 5% 3W AXIAL 1,837 RFQ In Stock
23J1K2 RES 1.2K OHM 3W 5% AXIAL 2,435 $2.0800 In Stock
20J12K5 RES 12.5K OHM 5% 10W AXIAL 4,145 RFQ In Stock
23J18R RES 18 OHM 3W 5% AXIAL 3,289 $1.5400 In Stock
25J75RE RES 75 OHM 5% 5W AXIAL 3,948 $1.2780 In Stock
23J4K5E RES 4.5K OHM 5% 3W AXIAL 3,798 $1.3320 In Stock
25J470 RES 470 OHM 5% 5W AXIAL 4,387 $1.1520 In Stock
25J8K0 RES 8K OHM 5% 5W AXIAL 1,526 RFQ In Stock
20J3R0 RES 3 OHM 5% 10W AXIAL 1,840 RFQ In Stock
25J50R RES 50 OHM 5W 5% AXIAL 2,559 $1.9900 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

25J47RE Specifications

Series 20
Package Bulk
Part Status Active
Resistance 47 Ohms
Tolerance ±5%
Power (Watts) 5W
Composition Wirewound
Features Flame Retardant Coating, Safety
Temperature Coefficient ±30ppm/°C
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.276" Dia x 1.016" L (7.00mm x 25.80mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CW00547R00JS73 RES 47 OHM 6.5W 5% AXIAL 8,226 $0.6112 87%
CW00547R00JE12HS RES 47 OHM 6.5W 5% AXIAL 2,623 $1.9388 87%
CW02B47R00JE70HE RES 47 OHM 3.75W 5% AXIAL 11,093 $0.4522 86%
CW02B47R00JE70 RES 47 OHM 3.75W 5% AXIAL 13,426 $0.3737 86%
CW02B47R00JS70 RES 47 OHM 3.75W 5% AXIAL 12,172 $0.4123 86%
CPW0547R00KB14 RES 47 OHM 5W 10% AXIAL 543 $10.0000 84%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 25J47RE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.