22J30R Ohmite component image

22J30R

In Stock

Ohmite logo Ohmite · franchised distributor

RES 30 OHM 2W 5% AXIAL

Listed in Through Hole Resistors

2,743 pcs in stock ships same day before 6pm

from $1.2780

Quantity Unit Price
1 - 249 $1.8500
250+ $1.2780 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 22J30R?

22J30R is a res 30 ohm 2w 5% axial, featuring a power rating of 2W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
23J6K0 RES 6K OHM 5% 3W AXIAL 1,837 RFQ In Stock
23J1K2 RES 1.2K OHM 3W 5% AXIAL 2,435 $2.0800 In Stock
20J12K5 RES 12.5K OHM 5% 10W AXIAL 4,145 RFQ In Stock
23J18R RES 18 OHM 3W 5% AXIAL 3,289 $1.5400 In Stock
25J75RE RES 75 OHM 5% 5W AXIAL 3,948 $1.2780 In Stock
23J4K5E RES 4.5K OHM 5% 3W AXIAL 3,798 $1.3320 In Stock
25J470 RES 470 OHM 5% 5W AXIAL 4,387 $1.1520 In Stock
25J8K0 RES 8K OHM 5% 5W AXIAL 1,526 RFQ In Stock
20J3R0 RES 3 OHM 5% 10W AXIAL 1,840 RFQ In Stock
25J50R RES 50 OHM 5W 5% AXIAL 2,559 $1.9900 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

22J30R Specifications

Series 20
Package Bulk
Part Status Active
Resistance 30 Ohms
Tolerance ±5%
Power (Watts) 2W
Composition Wirewound
Features Flame Retardant Coating, Safety
Temperature Coefficient ±30ppm/°C
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.220" Dia x 0.421" L (5.60mm x 10.70mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
22J30RE RES 30 OHM 5% 2W AXIAL 4,319 $1.1700 100%
92J30R RES 30 OHM 5% 2.25W AXIAL 1,559 $3.2725 94%
92J30RE RES 30 OHM 5% 2.25W AXIAL 1,697 $3.0275 94%
91J30R RES 30 OHM 5% 1.5W AXIAL 3,438 RFQ 86%
91J30RE RES 30 OHM 5% 1.5W AXIAL 980 $5.2640 86%
93J30RE RES 30 OHM 5% 3.25W AXIAL 1,942 $2.6250 77%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 22J30R or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.