21J30R Ohmite component image

21J30R

In Stock

Ohmite logo Ohmite · franchised distributor

1W 30 OHMS VITREOUS 5%

Listed in Through Hole Resistors

6,223 pcs in stock ships same day before 6pm

from $0.8088

Quantity Unit Price
1+ $0.8088 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 21J30R?

21J30R is a 1w 30 ohms vitreous 5%, featuring a power rating of 1W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

23 variants of this series in stock
Part Number Description Stock Unit Price Status
25J2K4 5W 2K4 OHMS VITREOUS 5% 7,995 $0.6283 In Stock
21J5R0 1W 5 OHMS VITREOUS 5% 5,701 $0.8833 In Stock
21J400 1W 400 OHMS VITREOUS 5% 5,050 $0.9986 In Stock
21J270E 1W 270 OHMS VITREOUS 5% 5,137 $0.9816 In Stock
21J270 1W 270 OHMS VITREOUS 5% 5,168 $0.9768 In Stock
20J24KE 10W 24K OHMS VITREOUS 5% 4,942 $1.0214 In Stock
22J12RE 2W 12 OHMS VITREOUS 5% 4,890 $1.0292 In Stock
21J680E 1W 680 OHMS VITREOUS 5% 5,130 $0.9830 In Stock
21J68RE 1W 68 OHMS VITREOUS 5% 4,493 $1.1213 In Stock
220PS-1R500F 12.5W 1.5 OHMS VITREOUS 1% 4,362 $1.1540 In Stock
+ 13 more variants in stock — browse the full category

Technical Parameters

21J30R Specifications

Series 20
Package Bulk
Part Status Active
Resistance 30 Ohms
Tolerance ±5%
Power (Watts) 1W
Composition Wirewound
Features Flame Retardant Coating, Safety
Temperature Coefficient ±30ppm/°C
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.157" Dia x 0.421" L (4.00mm x 10.70mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
91J30RE RES 30 OHM 5% 1.5W AXIAL 980 $5.2640 81%
91J30R RES 30 OHM 5% 1.5W AXIAL 3,438 RFQ 81%
93J30R RES 30 OHM 3.25W 5% AXIAL 1,664 $3.0600 67%
92J30RE RES 30 OHM 5% 2.25W AXIAL 1,697 $3.0275 67%
22J30RE RES 30 OHM 5% 2W AXIAL 4,319 $1.1700 67%
93J30RE RES 30 OHM 5% 3.25W AXIAL 1,942 $2.6250 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 21J30R or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.