21J10RE Ohmite component image

21J10RE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 10 OHM 5% 1W AXIAL

Listed in Through Hole Resistors

2,542 pcs in stock ships same day before 6pm

from $2.0000

Quantity Unit Price
1 - 249 $2.0000 BEST
250+ $2.0000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 21J10RE?

21J10RE is a res 10 ohm 5% 1w axial, featuring a power rating of 1W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
23J6K0 RES 6K OHM 5% 3W AXIAL 1,837 RFQ In Stock
23J1K2 RES 1.2K OHM 3W 5% AXIAL 2,435 $2.0800 In Stock
20J12K5 RES 12.5K OHM 5% 10W AXIAL 4,145 RFQ In Stock
23J18R RES 18 OHM 3W 5% AXIAL 3,289 $1.5400 In Stock
25J75RE RES 75 OHM 5% 5W AXIAL 3,948 $1.2780 In Stock
23J4K5E RES 4.5K OHM 5% 3W AXIAL 3,798 $1.3320 In Stock
25J470 RES 470 OHM 5% 5W AXIAL 4,387 $1.1520 In Stock
25J8K0 RES 8K OHM 5% 5W AXIAL 1,526 RFQ In Stock
20J3R0 RES 3 OHM 5% 10W AXIAL 1,840 RFQ In Stock
25J50R RES 50 OHM 5W 5% AXIAL 2,559 $1.9900 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

21J10RE Specifications

Series 20
Package Bulk
Part Status Active
Resistance 10 Ohms
Tolerance ±5%
Power (Watts) 1W
Composition Wirewound
Features Flame Retardant Coating, Safety
Temperature Coefficient ±30ppm/°C
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.157" Dia x 0.421" L (4.00mm x 10.70mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
21J10R RES 10 OHM 5% 1W AXIAL 2,432 $2.0960 100%
KC1/2A10RJT RES 10.0 OHM 1.2W 5% AXIAL 2,130 $2.3805 91%
91J10RE RES 10 OHM 1.5W 5% AXIAL 847 $6.2300 81%
27J10RE RES 10 OHM 7W 5% AXIAL 2,257 $2.2600 67%
90J10RE RES 10 OHM 5% 11W AXIAL 1,178 $4.3840 67%
22J10RE RES 10 OHM 5% 2W AXIAL 4,310 $1.1700 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 21J10RE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.