2108994-1 TE Connectivity AMP Connectors component image

2108994-1

In Stock

TE Connectivity AMP Connectors logo TE Connectivity AMP Connectors · franchised distributor

4G LTE ANTENNA (PCB TYPE), T&R P

Listed in RF Antennas

3,469 pcs in stock ships same day before 6pm

from $1.4545

Quantity Unit Price
1+ $1.4545 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 2108994-1?

2108994-1 is a 4g lte antenna (pcb type), t&r p, featuring a max power of 3 W. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

TE Connectivity AMP Connectors Series Variants in Stock

43 variants of this series in stock
Part Number Description Stock Unit Price Status
2118060-1 RF ANT 3.1/5.5GHZ FLT U.FL 350MM 907 $5.7100 In Stock
2361492-2 PCB ANTENNA,CABLE,MHF,698-2700MH 2,406 $2.1200 In Stock
2344656-1 WLAN DUAL BAND ANTENNA FPC V 50M 2,635 $1.9300 In Stock
2344656-3 WLAN DUAL BAND ANTENNA FPC V 150 2,439 $2.0900 In Stock
NMOQW700 STAINLESS BASE / WHIP, 0 DB / 2 398 $14.2400 In Stock
2367286-2 LTE ANTENNA COTS FPC ASSEMBLY 50 3,714 $1.3600 In Stock
2118909-4 WLAN TRIPLE BAND ANT MHF4 CABLE 2,067 $2.4700 In Stock
2344656-7 WLAN DUAL BAND ANTENNA FPC V 150 2,819 $1.8000 In Stock
2344656-2 WLAN DUAL BAND ANTENNA FPC V 100 6,290 $0.8000 In Stock
2118908-2 PCB,WLAN TRIPLE BAND TAPE AND RE 4,761 $1.0600 In Stock
+ 33 more variants in stock — browse the full category

Technical Parameters

2108994-1 Specifications

Series -
Package Bulk
Part Status Active
RF Family/Standard Cellular
Frequency Group Wide Band
Frequency (Center/Band) 829MHz, 1.94GHz, 2.5GHz
Frequency Range 698MHz ~ 960MHz, 1.71GHz ~ 2.17GHz, 2.3GHz ~ 2.7GHz
Antenna Type Chip
Number of Bands 3
VSWR 3
Return Loss -7dB
Gain 0.7dBi, 0.9dBi, 1.1dBi, 2.3dBi, 0.7dBi, 1.3dBi
Power - Max 3 W
Features -
Termination Solder
Ingress Protection -
Mounting Type Surface Mount
Height (Max) 0.126" (3.20mm)
Applications LTE

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
2118903-1 LTE/CELL BAND ANTENNA 4,479 $1.1246 100%
2108784-2 5G/4G/3G/2G, NB-IOT, CAT-M, GNSS 6,749 $0.7452 100%
SR4L002 RF ANT 829MHZ/1.9GHZ CHIP SLD 1,195 $4.2900 100%
1462000011 RF ANT CER PATCH SOLDER SMD 1,951 $2.6200 100%
ACAR3705-SB RF ANT LPWA SUBGHZ CHIP SMD 1,038 $4.9600 100%
2108784-1 PCB ANTENNA, SMD, 698-6000MHZ 3,098 $1.6400 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

TE Connectivity AMP Connectors Parts in Stock

Request a Quote

Need 2108994-1 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.