20J25KE Ohmite component image

20J25KE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 25K OHM 5% 10W AXIAL

Listed in Through Hole Resistors

1,249 pcs in stock ships same day before 6pm

from $1.9200

Quantity Unit Price
1 - 9 $4.1600
10 - 24 $3.7600
25 - 49 $3.4400
50 - 99 $3.2000
100 - 249 $2.8000
250 - 499 $2.4000
500 - 999 $2.2000
1,000 - 4,999 $2.0160
5,000+ $1.9200 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 20J25KE?

20J25KE is a res 25k ohm 5% 10w axial, featuring a power rating of 10W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
23J6K0 RES 6K OHM 5% 3W AXIAL 1,837 RFQ In Stock
23J1K2 RES 1.2K OHM 3W 5% AXIAL 2,435 $2.0800 In Stock
20J12K5 RES 12.5K OHM 5% 10W AXIAL 4,145 RFQ In Stock
23J18R RES 18 OHM 3W 5% AXIAL 3,289 $1.5400 In Stock
25J75RE RES 75 OHM 5% 5W AXIAL 3,948 $1.2780 In Stock
23J4K5E RES 4.5K OHM 5% 3W AXIAL 3,798 $1.3320 In Stock
25J470 RES 470 OHM 5% 5W AXIAL 4,387 $1.1520 In Stock
25J8K0 RES 8K OHM 5% 5W AXIAL 1,526 RFQ In Stock
20J3R0 RES 3 OHM 5% 10W AXIAL 1,840 RFQ In Stock
25J50R RES 50 OHM 5W 5% AXIAL 2,559 $1.9900 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

20J25KE Specifications

Series 20
Package Bulk
Part Status Active
Resistance 25 kOhms
Tolerance ±5%
Power (Watts) 10W
Composition Wirewound
Features Flame Retardant Coating, Safety
Temperature Coefficient ±30ppm/°C
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.394" Dia x 1.858" L (10.00mm x 47.20mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CW01025K00JS73 RES 25K OHM 13W 5% AXIAL 3,087 $1.6428 87%
CW01025K00JR69 RES 25K OHM 13W 5% AXIAL 3,486 $1.4544 87%
CW01024K70JE123 RES 24.7K OHM 13W 5% AXIAL 2,366 $2.1571 87%
CW01024K70JE733 RES 24.7K OHM 13W 5% AXIAL 3,145 $1.6110 87%
CW01024K70JE73 RES 24.7K OHM 13W 5% AXIAL 3,388 $1.4950 87%
CPW1025K00KE143 RES 25K OHM 10W 10% AXIAL 112 $80.0000 84%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 20J25KE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.