1WD10 NTE Electronics, Inc. component image

1WD10

In Stock

NTE Electronics, Inc. logo NTE Electronics, Inc. · franchised distributor

1W .10 OHM 5%

Listed in Through Hole Resistors

17,898 pcs in stock ships same day before 6pm

from $0.2800

Quantity Unit Price
1+ $0.2800 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 1WD10?

1WD10 is a 1w .10 ohm 5%, featuring a power rating of 1W, a tolerance of ±5%, a Metal Oxide Film composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

NTE Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
1W036 RES-1W 36 OHM 2% 33,376 $0.1500 In Stock
1W147 RES-1W 470 OHM 2% 33,373 $0.1500 In Stock
1W347 RES-1W 47K OHM 2% 33,381 $0.1500 In Stock
1W112 RES-1W 120 OHM 2% 33,379 $0.1500 In Stock
1W027 RES-1W 27 OHM 2% 33,367 $0.1500 In Stock
1W324 RES-1W 24K OHM 2% 33,367 $0.1500 In Stock
1W224 RES-1 W 2.4K OHM 2% 33,382 $0.1500 In Stock
1WD12 1W .12 OHM 5% 17,894 $0.2800 In Stock
1W282 RES-1W 8.2K OHM 2% 33,363 $0.1500 In Stock
1WD82 1W .82 OHM 5% 20,876 $0.2400 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

1WD10 Specifications

Series -
Package Bag
Part Status Active
Resistance 100 mOhms
Tolerance ±5%
Power (Watts) 1W
Composition Metal Oxide Film
Features Flame Proof, Safety
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 200°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.154" Dia x 0.425" L (3.90mm x 10.80mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
RSF1JBR100 RES 0.1 OHM 1W 5% AXIAL 91,949 $0.0544 100%
RSMF1JAR100 RES 0.1 OHM 1W 5% AXIAL 108,266 $0.0462 100%
RSF1FBR100 RES 0.1 OHM 1W 1% AXIAL 60,135 $0.0832 75%
RSMF12GTR100 RES 0.1 OHM 1/2W 2% AXIAL 99,248 $0.0504 69%
RSMF3JTR100 RES 0.1 OHM 3W 5% AXIAL 7,851 $0.6400 67%
RSF2JBR100 RES 0.1 OHM 2W 5% AXIAL 59,011 $0.0848 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

NTE Electronics, Inc. Parts in Stock

Request a Quote

Need 1WD10 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.