1WCC010 NTE Electronics, Inc. component image

1WCC010

In Stock

NTE Electronics, Inc. logo NTE Electronics, Inc. · franchised distributor

RES-1W 10 OHM 10%

Listed in Through Hole Resistors

1,352 pcs in stock ships same day before 6pm

from $3.8000

Quantity Unit Price
1+ $3.8000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 1WCC010?

1WCC010 is a res-1w 10 ohm 10%, featuring a power rating of 1W, a tolerance of ±10%, a Carbon Composition composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

NTE Electronics, Inc. Series Variants in Stock

31 variants of this series in stock
Part Number Description Stock Unit Price Status
1WCC233 RES-1W 3.3K OHM 10% 1,361 $3.8000 In Stock
1WCC133 RES-1W 330OHM 10% 1,348 $3.8000 In Stock
1WCC022 RES-1W 22 OHM 10% 1,350 $3.8000 In Stock
1WCC147 RES-1W 470 OHM 10% 1,361 $3.8000 In Stock
1WCC347 RES-1W 47K OHM 10% 1,345 $3.8000 In Stock
1WCC222 RES-1W 2.2K OHM 10% 1,350 $3.8000 In Stock
1WCC415 RES-1W 150K OHM 10% 1,357 $3.8000 In Stock
1WCC422 RES-1W 220K OHM 10% 1,348 $3.8000 In Stock
1WCC210 RES-1W 1K OHM 10% 1,353 $3.8000 In Stock
1WCC410 RES-1W 100K OHM 10% 1,353 $3.8000 In Stock
+ 21 more variants in stock — browse the full category

Technical Parameters

1WCC010 Specifications

Series -
Package Bag
Part Status Active
Resistance 10 Ohms
Tolerance ±10%
Power (Watts) 1W
Composition Carbon Composition
Features -
Temperature Coefficient -
Operating Temperature -55°C ~ 150°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.225" Dia x 0.562" L (5.72mm x 14.27mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
RC14KB10R0 RES 10 OHM 1/4W 10% AXIAL 47,653 $0.1050 100%
RC14KT10R0 RES 10 OHM 1/4W 10% AXIAL 50,164 $0.0998 100%
RC12KT10R0 RES 10 OHM 1/2W 10% AXIAL 44,262 $0.1131 100%
RC12KB10R0 RES 10 OHM 1/2W 10% AXIAL 42,047 $0.1190 100%
RC14JB10R0 RES 10 OHM 1/4W 5% AXIAL 46,414 $0.1078 76%
OF100JE RES 10 OHM 5% 1/2W AXIAL 5,349 $0.9400 76%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

NTE Electronics, Inc. Parts in Stock

Request a Quote

Need 1WCC010 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.