1614895-2 TE Connectivity AMP Connectors component image

1614895-2

In Stock

TE Connectivity AMP Connectors logo TE Connectivity AMP Connectors · franchised distributor

RES SMD 9.18KOHM 0.1% 1/10W 0805

Listed in Chip Resistor - Surface Mount

42,462 pcs in stock ships same day before 6pm

from $0.1179

Quantity Unit Price
1+ $0.1179 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 1614895-2?

1614895-2 is a res smd 9.18kohm 0.1% 1/10w 0805, featuring a power rating of 0.1W, 1/10W, a tolerance of ±0.1%, a Thin Film composition, and the 0805 (2012 Metric) case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

TE Connectivity AMP Connectors Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
3-1614895-8 RES SMD 9.92KOHM 0.1% 1/10W 0805 42,460 $0.1179 In Stock
1-1614895-0 RES SMD 9.34KOHM 0.1% 1/10W 0805 42,462 $0.1179 In Stock
2-1614895-3 RES SMD 9.6K OHM 0.1% 1/10W 0805 42,444 $0.1179 In Stock
3-1614895-4 RES SMD 9.84KOHM 0.1% 1/10W 0805 42,457 $0.1179 In Stock
1614895-7 RES SMD 9.28KOHM 0.1% 1/10W 0805 42,461 $0.1179 In Stock
3-1614895-3 RES SMD 9.82KOHM 0.1% 1/10W 0805 42,449 $0.1179 In Stock
1-1614895-9 RES SMD 9.52KOHM 0.1% 1/10W 0805 42,447 $0.1179 In Stock
1-1614895-4 RES SMD 9.42KOHM 0.1% 1/10W 0805 42,451 $0.1179 In Stock
4-1614895-8 RES SMD 10.14K OHM 1/10W 0805 42,457 $0.1179 In Stock
6-1614895-2 RES SMD 10.44K OHM 1/10W 0805 42,450 $0.1179 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

1614895-2 Specifications

Series CPF, Neohm
Package Tape & Reel (TR)
Part Status Active
Resistance 9.18 kOhms
Tolerance ±0.1%
Power (Watts) 0.1W, 1/10W
Composition Thin Film
Features -
Temperature Coefficient ±25ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case 0805 (2012 Metric)
Supplier Device Package 0805
Ratings -
Size / Dimension 0.079" L x 0.049" W (2.00mm x 1.25mm)
Height - Seated (Max) 0.026" (0.65mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
1614895-3 RES SMD 9.2K OHM 0.1% 1/10W 0805 42,447 $0.1179 100%
1614895-4 RES SMD 9.22KOHM 0.1% 1/10W 0805 42,459 $0.1179 100%
1614895-5 RES SMD 9.24KOHM 0.1% 1/10W 0805 42,456 $0.1179 99%
1614895-6 RES SMD 9.26KOHM 0.1% 1/10W 0805 42,449 $0.1179 99%
ERA-6VRB9101V RES 9.1K OHM 0.1% 1/4W 0805 25,501 $0.1964 99%
RNCF0805BKE9K10 RES 9.1K OHM 0.1% 1/8W 0805 54,161 $0.0924 99%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

TE Connectivity AMP Connectors Parts in Stock

Request a Quote

Need 1614895-2 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.