10WRD50 NTE Electronics, Inc. component image

10WRD50

In Stock

NTE Electronics, Inc. logo NTE Electronics, Inc. · franchised distributor

RES-10W 0.50 OHM 5%

Listed in Through Hole Resistors

2,041 pcs in stock ships same day before 6pm

from $2.5100

Quantity Unit Price
1+ $2.5100 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 10WRD50?

10WRD50 is a res-10w 0.50 ohm 5%, featuring a power rating of 10W, a tolerance of ±5%, a Wirewound composition, and the Axial case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

NTE Electronics, Inc. Series Variants in Stock

46 variants of this series in stock
Part Number Description Stock Unit Price Status
5WR227 RES-5W 2.7K OHM 5% 6,708 $0.7500 In Stock
10WR025 RES-10W 25 OHM 5% 3,820 $1.3200 In Stock
5WR250 RES-5W 5K OHM 5% 6,710 $0.7500 In Stock
5WR018 RES-5W 18 OHM 5% 7,493 $0.6700 In Stock
5WR211 RES-5W 1.1K OHM 5% 6,697 $0.7500 In Stock
5WR127 RES-5W 270 OHM 5% 7,511 $0.6700 In Stock
10WR120 RES-10W 200 OHM 5% 3,819 $1.3200 In Stock
10WR050 RES-10W 50 OHM 5% 3,817 $1.3200 In Stock
5WR040 RES-5W 40 OHM 5% 7,512 $0.6700 In Stock
5WR247 RES-5W 4.7K OHM 5% 6,702 $0.7500 In Stock
+ 36 more variants in stock — browse the full category

Technical Parameters

10WRD50 Specifications

Series -
Package Bag
Part Status Active
Resistance 500 mOhms
Tolerance ±5%
Power (Watts) 10W
Composition Wirewound
Features -
Temperature Coefficient ±90ppm/°C
Operating Temperature -65°C ~ 250°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.375" Dia x 1.875" L (9.52mm x 47.62mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CW001R5000JE70 RES 0.5 OHM 5% AXIAL 5,711 $0.8800 100%
40JR50E RES 500M OHM 5% 10W AXIAL 1,436 $3.5800 100%
40JR50 RES 500M OHM 5% 10W AXIAL 2,339 RFQ 100%
CW010R5000JB12 RES 0.5 OHM 13W 5% AXIAL 2,030 $2.5030 87%
RS010R5000FE73 RES 0.5 OHM 10W 1% WW AXIAL 1,813 $2.8300 75%
CW010R5000KE733 RES 0.5 OHM 13W 10% AXIAL 3,471 $1.4529 72%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

NTE Electronics, Inc. Parts in Stock

Request a Quote

Need 10WRD50 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.