10WR150 NTE Electronics, Inc. component image

10WR150

In Stock

NTE Electronics, Inc. logo NTE Electronics, Inc. · franchised distributor

RES-10W 500 OHM 5%

Listed in Through Hole Resistors

3,826 pcs in stock ships same day before 6pm

from $1.3200

Quantity Unit Price
1+ $1.3200 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 10WR150?

10WR150 is a res-10w 500 ohm 5%, featuring a power rating of 10W, a tolerance of ±5%, a Wirewound composition, and the Axial case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

NTE Electronics, Inc. Series Variants in Stock

46 variants of this series in stock
Part Number Description Stock Unit Price Status
5WR227 RES-5W 2.7K OHM 5% 6,708 $0.7500 In Stock
10WR025 RES-10W 25 OHM 5% 3,820 $1.3200 In Stock
5WR250 RES-5W 5K OHM 5% 6,710 $0.7500 In Stock
5WR018 RES-5W 18 OHM 5% 7,493 $0.6700 In Stock
5WR211 RES-5W 1.1K OHM 5% 6,697 $0.7500 In Stock
5WR127 RES-5W 270 OHM 5% 7,511 $0.6700 In Stock
10WR120 RES-10W 200 OHM 5% 3,819 $1.3200 In Stock
10WR050 RES-10W 50 OHM 5% 3,817 $1.3200 In Stock
5WR040 RES-5W 40 OHM 5% 7,512 $0.6700 In Stock
5WR247 RES-5W 4.7K OHM 5% 6,702 $0.7500 In Stock
+ 36 more variants in stock — browse the full category

Technical Parameters

10WR150 Specifications

Series -
Package Bag
Part Status Active
Resistance 500 Ohms
Tolerance ±5%
Power (Watts) 10W
Composition Wirewound
Features -
Temperature Coefficient ±30ppm/°C
Operating Temperature -65°C ~ 250°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.375" Dia x 1.875" L (9.52mm x 47.62mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
20J500 RES 500 OHM 5% 10W AXIAL 1,881 $2.7000 100%
90J500 RES 500 OHM 5% 11W AXIAL 3,263 RFQ 95%
CW010500R0JE73 RES 500 OHM 13W 5% AXIAL 5,097 $0.9885 87%
CW010500R0JE733 RES 500 OHM 13W 5% AXIAL 4,306 $1.1730 87%
CW010500R0JE123 RES 500 OHM 13W 5% AXIAL 2,872 $1.7682 87%
CW010500R0JB12 RES 500 OHM 13W 5% AXIAL 2,603 $1.9446 87%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

NTE Electronics, Inc. Parts in Stock

Request a Quote

Need 10WR150 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.