10W268 NTE Electronics, Inc. component image

10W268

In Stock

NTE Electronics, Inc. logo NTE Electronics, Inc. · franchised distributor

10 W 6.8K OHM 5%

Listed in Through Hole Resistors

8,105 pcs in stock ships same day before 6pm

from $0.6200

Quantity Unit Price
1+ $0.6200 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 10W268?

10W268 is a 10 w 6.8k ohm 5%, featuring a power rating of 10W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

NTE Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
10W139 10W 390 OHMS 5% 8,095 $0.6200 In Stock
10W312 10 W 12K OHM 5% 8,096 $0.6200 In Stock
10W5D6 10W 5.6 OHM 5% 8,094 $0.6200 In Stock
10WD56 10W .56 OHM 5% 8,108 $0.6200 In Stock
10W015 10W 15 OHM 5% 8,098 $0.6200 In Stock
10W3D3 10W 3.3 OHM 5% 8,094 $0.6200 In Stock
10WD36 10W .36 OHM 5% 8,112 $0.6200 In Stock
10W1D5 10W 1.5 OHMS 5% 8,095 $0.6200 In Stock
10W318 10 W 18K OHM 5% 8,101 $0.6200 In Stock
10W022 10W 22 OHMS 5% 8,111 $0.6200 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

10W268 Specifications

Series -
Package Bag
Part Status Active
Resistance 6.8 kOhms
Tolerance ±5%
Power (Watts) 10W
Composition Wirewound
Features -
Temperature Coefficient ±300ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.380" Square x 1.890" L (9.65mm x 48.00mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
PNP10VJT-91-6K8 RES WW 10W 5% AXIAL 6,402 $0.7847 100%
CP00106K800JE1491 RES 6.8K OHM 10W 5% AXIAL 301 $19.0000 100%
EP9WS6K8J RES 6.8K OHM 9W 5% AXIAL 3,098 $1.6400 95%
1-2176080-8 RES 6.8K OHM 5% 9W AXIAL 5,136 $0.9800 95%
EP9W6K8J RES 6.8K OHM 9W 5% AXIAL 2,779 $1.8200 95%
PNP7WVJT-91-6K8 RES WW 7W 5% AXIAL 11,452 $0.4380 83%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

NTE Electronics, Inc. Parts in Stock

Request a Quote

Need 10W268 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.