102A9K800B Ohmite component image

102A9K800B

In Stock

Ohmite logo Ohmite · franchised distributor

9800 OHMS 0.1W .1%

Listed in Through Hole Resistors

586 pcs in stock ships same day before 6pm

from $9.2517

Quantity Unit Price
1+ $9.2517 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 102A9K800B?

102A9K800B is a 9800 ohms 0.1w .1%, featuring a power rating of 0.1W, 1/10W, a tolerance of ±0.1%, a Ceramic composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

13 variants of this series in stock
Part Number Description Stock Unit Price Status
102A12K00T 12000 OHMS 0.1W 0.01% 588 $9.1550 In Stock
102A2K000B 2000 OHMS 0.1W 0.1% 606 $8.9438 In Stock
102A200K0F 200K OHMS 0.1W 1% 500 $11.0150 In Stock
102A10K00B 10000 OHMS 0.1W 0.1% 580 $9.1250 In Stock
102A200R0B 200 OHMS 0.1W 0.1% 607 $8.9427 In Stock
102A1K000B 1000 OHMS 0.1W 0.1% 593 $8.9575 In Stock
25030TE57S32RJE 30W 32 OHMS VIT 5% 786 $6.6980 In Stock
25030TE57U1K0JE 30W 1000 OHMS VIT 5% 1,233 $4.1850 In Stock
25020TA57SB-60R 20W 60 OHMS VIT 5% 1,507 $3.3925 In Stock
25030TE57U-10K 30W 10000 OHMS VIT 5% 1,260 $4.1300 In Stock
+ 3 more variants in stock — browse the full category

Technical Parameters

102A9K800B Specifications

Series 100
Package Bulk
Part Status Active
Resistance 9.8 kOhms
Tolerance ±0.1%
Power (Watts) 0.1W, 1/10W
Composition Ceramic
Features High Voltage, Moisture Resistant, Non-Inductive
Temperature Coefficient -
Operating Temperature -55°C ~ 230°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.311" Dia x 2.126" L (7.90mm x 54.00mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
102A10K00B 10000 OHMS 0.1W 0.1% 580 $9.1250 98%
102A12K00T 12000 OHMS 0.1W 0.01% 588 $9.1550 82%
234BA103KDS RES 10K OHM 10% 2.4W AXIAL 408 $13.9500 61%
252BA103KDS RES 10K OHM 10% 5W AXIAL 366 $15.7000 61%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 102A9K800B or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.