0097072802 Laird - Performance Materials component image

0097072802

In Stock

Laird - Performance Materials logo Laird - Performance Materials · franchised distributor

GASKET BECU 15.88X11.35MM

Listed in RFI and EMI - Contacts, Fingerstock and Gaskets

1,900 pcs in stock ships same day before 6pm

from $1.0286

Quantity Unit Price
1 - 9 $2.7000
10 - 24 $2.3971
25 - 99 $2.1653
100 - 249 $1.8948
250 - 499 $1.6628
500 - 999 $1.4694
1,000 - 2,499 $1.1601
2,500 - 4,999 $1.0828
5,000+ $1.0286 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 0097072802?

0097072802 is a gasket becu 15.88x11.35mm, featuring the Bulk package. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Laird - Performance Materials Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
BMI-S-107 RF SHIELD 1.747"X1.747" SLDR 1PC 1,328 $3.8900 In Stock
BMI-S-226-F RF SHIELD SOLDER 1,504 $3.4340 In Stock
BMI-S-208-F RF SHIELD 1.559" X 1.559" SOLDER 1,646 $3.1100 In Stock
BMI-S-103 RF SHIELD 1.032"X1.032" SLDR 1PC 2,328 $2.1800 In Stock
BMI-S-209-F RF SHIELD 0.728" X 1.156" SOLDER 3,110 $1.6300 In Stock
BMI-S-205-C RF SHIELD 1.018"X1.518" ADHESIVE 4,630 $1.0900 In Stock
BMI-S-203-C RF SHIELD 1.05" X 1.05" SNAP FIT 3,116 $1.6300 In Stock
BMI-S-230-F-R RF SHIELD 2" X 1.5" SOLDER 3,364 $1.5000 In Stock
BMI-S-102 RF SHIELD 0.65"X0.65" SOLDER 1PC 2,765 $1.8400 In Stock
BMI-S-104 RF SHIELD 1.26"X1.26" SOLDER 1PC 2,000 $2.5600 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

0097072802 Specifications

Series USB Connector
Package Bulk
Part Status Active
Type -
Shape -
Width 0.625" (15.88mm)
Length 0.447" (11.35mm)
Height -
Material -
Plating -
Plating - Thickness -
Attachment Method -
Operating Temperature -

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Laird - Performance Materials Parts in Stock

Request a Quote

Need 0097072802 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.